Now I know I'm not crazy. Also having the same issue and this is a HUGE issue. Please fix this ASAP ! ! !

@PeteS160 @Groopan please check whether if you using the auto-router v0.8.1? if not, please download this version and try again. we can't repeat this issue. please send us the PCB file to [support@easyeda.com](mailto:support@easyeda.com) via: [https://docs.easyeda.com/en/Export/Export-EasyEDA-Source-File/index.html](https://docs.easyeda.com/en/Export/Export-EasyEDA-Source-File/index.html) Thank you

The same problem occurred with me after I upgraded to version 5 .9.31 of 01.09.2019. I use it auto-router v0.8.1. How can I use the old version?

@lz2zg @PeteS160 Do you mean a new track will overlap a routed track when auto-route the skip routed net?

Yes exactly. Skip routed nets and Skip nets not functional after latest update.

I also notice a great delay in manual work with the PCB! Is it just me?

@lz2zg Got it, we will figure it out

 I tried using .8.1 router and have the same issue.In my case I select "Skip Nets" and it doesn't matter what nets I add to the list, it still tries to route them. I say tries because it's unable to route every net. What also stands out as being very odd is it only ran one track on the bottom of the board and I'm using a mix of though hole and smd parts so I would have expected to see a lot more.  I tried adding copper pours and set them to the same net as my grounds, it will connect the grounds of my parts to the pour like I would expect but it also tries to route actual tracks as well. It's very frustrating when this works fine one day and I come back the next day only to find out the program is now broken and I need to wait to finish the pcb.

I'm having the same problem. Skip nets does not seem to workIs there already a solution for this ? ( windows 10 router 8.1)

@Bertweb please wait for v6.1

Ok Thanks!!!

Hi, I have same problem with autorouter. I have some nets routed manually and start autorouter with checked "skip routed net". Autorouter quickly done with zero failed, but half of nets still isn't routed.

Still not resolved ...