Do I select all, then 'lock' everything on the board, then just unlock the 2 caps, update, then re-place them correct orientation on the board?

If this is an update to a board created before EasyEDA v6.3.39 then see: [https://easyeda.com/forum/topic/How-to-solve-PCB-components-removed-and-added-after-Import-Changes-or-Update-PCB-9dbbeabbfdfa401986fa1d03b2316245](https://easyeda.com/forum/topic/How-to-solve-PCB-components-removed-and-added-after-Import-Changes-or-Update-PCB-9dbbeabbfdfa401986fa1d03b2316245)<br> <br>

@MattyB, ...and if it's not then it shouldn't move anything, the nets should update but that is all. _ The following procedure works in testing: 1\. Rotate the component in the schematic\. 2\. Save the schematic\. 3\. Switch to PCB and save it if it isn't already\. 4\. Click the 'Import Changes' button\. 5\. The 'Confirm Importing changes information' window should report that under 'Components' Nothing changed\.\.\.\.\.but\.\.\.\. under 'Nets' you should have a list of changed Nets. 6\. Check the box 'Also update track's net \(Only applies to circumstance under which prefix/netlabel and no component/wire is added or removed\.' which is hidden away at the very bottom of the window\. 7\. Click 'Apply changes'\. 8\. Sit back\, light your pipe and admire your handywork\. _ Regards.

[andyfierman](https://easyeda.com/andyfierman)'s answer was the solution .... Its a design from several months ago