Hello, Upon opening my PCB editor, the origin is at -490,-390, (aprox). And my PCB is a dot way off the page, that I must zoom into to see/ work on. I am unable to find any via's, parts, or anything else, not right around the PCB. Because of this I am unable to print a 1:1 layout to check part sizing, etc. All I get is a page full of canvas. I am using the 'Export PDF' function to do this. I would be grateful for a second eye on this problem. -Lisa Dalton [https://easyeda\.com/editor\#id=efd87536b73a4959a680d78a01346dd6\|c9279a7958064c3c83d23789c52cbc2c](https://easyeda.com/editor#id=efd87536b73a4959a680d78a01346dd6|c9279a7958064c3c83d23789c52cbc2c)