Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

The dimensions of Easyeda tracks are not right on my CNC3018 Pro

1074 3

didiersee 5 years ago

Hello world I made a pcb test on Easyeda with a track of 1mm of width and two round pellets of 2.5mm of diameter I used FlatCam to create the Gcode towards GRBL and a CNC3018Pro to engrave. When I finished engraving the PCB the track is only 0.5mm wide and the round pellets are only 1mm wide. How can I fix this problem? Thank you for help.

Electron 3.0.11 Windows 10 EasyEDA 6.2.46

Comments

UserSupport 5 years ago

hi if you measure the track width on Gerber view tool is correct, please contact FlatCam, for many PCB orders, it is correct. I believe it isn't Gerber's issue

Firefox 70.0 Windows 10 EasyEDA 6.2.46

didiersee 5 years ago

@UserSupport Thanks

Electron 3.0.11 Windows 81 EasyEDA 6.2.46

didiersee 5 years ago

@didierseeI just made the same circuit to print with openbuild control V 1.0.199 And there I have dimensions just whereas with GRBL not the dimlensions are too small, width of the tracks, the dimensions of the holes too small etc ... I used the same Gcode generated by Easyeda with both software. Could you help me solve this problem? I am under Windows 10 and my CNC is a 3018 PRO. Thank you

Electron 3.0.11 Windows 10 EasyEDA 6.2.46

你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice