Your file is private, no one can see it. you can print an image at here. or make sure the island

Juana, Please make sure you have set the `Copper Area` to `Visible` in the PCB editor right hand panel. Please also see: https://easyeda.com/Doc/Tutorial/PCB.htm#Copper-Area and check that you have assigned a net to the copper area and set the `Islands` attribute to `No`.

Hello Andyfierman and thanks for your answer but I still can't solve my problem. I have set the Copper Area to Visible and I set the Islands attribute to No as you told me but the Copper area doesn't want to appear. I saved the file in a public folder for you can see it and the file is this https://easyeda.com/editor#id=3c1e26c8249b446ebe49f91b217da8eb|92a3e71128444b2da393601d431a6162

![The Copper area doesn't want to appear][1] [1]: /editor/20170710/59629c2f0403c.jpg

![enter image description here][1] [1]: /editor/20170710/5962d2b4584d5.png

Hi, It seems you have been set the keep island as no of the copper area. You need to set it as Yes ![enter image description here][1] [1]: /editor/20170710/5962d6ad19107.gif

Because your PCB have no GND net, so your copper area will be supposed to an island. If you set keep island as no, all copper area will disappear. You set one footprint a net as GND can fix this problem.

Thanks for your answer but you told me that my pcb have no GND net, on the other hand I would like connect the last pad of the chip (integrated circuit) to GND but I don't know how can I do it

@Juanpa Selecting your chip a PAD and set its net as GND on the left panel ![enter image description here][1] [1]: /editor/20170711/596429ce8adb4.png

Or you can set copper area net as empty will solve that too.

sorry ，please ignore my previous reply, set copper area net as empty that can not take effect now.

Thanks for your answer