Can you make the schematic public? Just in case the problem is related to this, check out the behaviour described in this topic: [https://easyeda.com/forum/topic/Block-move-loses-some-connections-6b8d2324567d4332acdf5a350875b8c0](https://easyeda.com/forum/topic/Block-move-loses-some-connections-6b8d2324567d4332acdf5a350875b8c0)

@andyfierman I made the project public\.  MACDADDY\_FDC\_20210331\_V1

@jeff.truck, For future reference, to save other people's time, please post the whole url to the project. This is your problem:  I can't work out why but there's an error of some sort in how these two supply block symbols are constructed. It may be the use of three numbers to designate the devices. The normal format is two numbers only such as U1.1, U1.2 etc. then U2.1, U2.2 etc. I also note that for U22 and U24, both outputs are marked as Q. One should be identified as Q and the other identified as Qn, notQ or /Q (as in U16) to distinguish the true and complement outputs. If you did not create these symbols then please use the right click **Report Error** tool.

Thanks Andy - My U22 and U24 components were indeed the issue.   URL comment noted for future reference.