Hey!
I'm pretty new to EasyEDA and i noticed an issue that i don't know how to fix.
When i copy a track that connects 2 pads together, and paste it where the next 2 pads are, they won't get connected. If you hover over the track all the connected pads light up, this is not the case for the copied one though. I tried also copying the pads but that gives me duplicate pads.
I really hope you know how i can get around this!
Thank you!
I have a board which has nine similar areas and routed one by hand, I then copied the traces to the other areas but as the OP says, they don't connect. This would be useful. I am using a schematic.
Mike.
@pommie,
I this is a different situation.
In your case I think you either need to be using the CRTL+SHIFT+C and CTRL+SHIFT+V copy and paste in the schematic and PCB or saving a single schematic as a Module and saving a PCB layout for a single instance of the circuit in the schematic as a PCB Module and then placing multipe modules in each editor.
For more, please read about Modules in the Tutorial.
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
It sounds like you are creating a PCB directly in the PCB Editor without first creating a Schematic from which to convert into a PCB.
You can do this in EasyEDA but we do not recommend it.
Please see:
https://easyeda.com/forum/topic/How_does_the_Connect_Pad_to_Pad_tool_work_-JgQO0Ay7H
https://easyeda.com/forum/topic/Understanding-Ratlines-371bdbf646c54b23a57451eb05b2026d
Please also study the Design Flow in the Tutorial.