If I manually upload the generated gerber zip file to the following site, jlcpcb fails. The original easyeda one looks like it works ok. [https://jlcpcb.com/quote](https://jlcpcb.com/quote) [https://gerber-viewer.easyeda.com/](https://gerber-viewer.easyeda.com/) When uploading the gerber to jlcpcb it gets to about 44% then starts to show the two rectangles where the top and bottom views would be shown, then they disappear and the page shows no gerber file loaded.

It seems this problem is specific to one particular design. I have tried to upload a previous board I created and it works ok. Is there any way to inspect/repair the problem file?

Hi Please download this project to [support@easyeda.com](mailto:support@easyeda.com) right-click the project folder - Download I will help to check. Thanks

Hi, Thank you for fast reply. I have emailed the project to you, name is `Project_MS330_Rev2_20181017042203.zip`

Hi After checking at my side, it can re-direct to jlpcb to order. but need to fill the option manually. can you try gain?

Hi, I am still having trouble with this but I think I found a solution. I deleted the readOnly.TopAssembly layer from the zipped gerber and the upload worked ok. All other ways to upload the file give me trouble.