I would very much like to use JLCPCBs via-in-pad technology in some projects, but via-in -pad is only really useful when you can build via stacks that don't have copper pads on every layer. Unfortunately, EasyEDA doesn't allow this. Best is buried or blind vias which will leave space for traces on remaining layers, but since JLCPCB can't offer that, second best is a through via where unconnected pads on inner layers can be removed from the via stack. This allows more room for traces/planes on inner layers  since they would only need clearance to the hole and not to the annular pad. A function that would allow me to remove unconnected pads from selected vias would be much appreciated. A completely manual function would be OK for my purposes, for instance selecting one or more vias and choosing which of the inner layers should have pads through a set of check boxes. Regards, Jonas