Hi,
My latest board designs include via points - are the via points designed to connect a trace on one layer to a trace on the other? I just had them fabricated and that does not appear to be the case.
Aidan F.
`Do the vias need to have holes in them for that to happen?`
Yes.
If you do not have holes in them then you just have pads on the top and the bottom with nothing to connect them.
Depends what you are using the vias for.
For most purposes the default via parameters in the **Via** tool in the **PCB Tools** toolbar should be OK.
![enter image description here][1]
![enter image description here][2]
This may help explain a few of the basics of PCB structures:
https://easyeda.com/andyfierman/Elements_of_a_simple_PCB-e42c7b2a4e17449f821a97d04806aeeb
[1]: /editor/20170707/595e95682d228.png
[2]: /editor/20170707/595e950eb16cb.png
Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice
