Home>Forum>Topic
Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss
Schematic PCB Simulation Skill Extension Feature Requests Bug Reports
You need to use EasyEDA editor to create some projects before publishing
What's the correct way to share pins on a symbol/footprint and have them connected electrically?
1447 7
bryan costanich 3 years ago
Hey folks, I have the following symbol/footprint combo: ![Screen Shot 2021-09-16 at 11.08.44 PM.png](//image.easyeda.com/pullimage/ksd4gmYdoPkAvYtiaXDw4qgKdmOIcbSia7ZS8iNP.png) ![Screen Shot 2021-09-16 at 11.08.36 PM.png](//image.easyeda.com/pullimage/NlSM4UTnsrWt4Co6DERcdCqxsHKpz5wMU39lvITo.png) Note that pin `6` is actually many pins. They're connected together on the part themselves, so they don't need to be connected on the footprint. So i need to use as in the following: ![Screen Shot 2021-09-16 at 11.09.01 PM.png](//image.easyeda.com/pullimage/OkKhr68SjbAIwKlDo0bbE2EvxX0y3cbxTO3ujMlx.png) But that leaves me with the following ratlines: ![Screen Shot 2021-09-16 at 11.09.12 PM.png](//image.easyeda.com/pullimage/1sA1soleH0V0njcBAj9kX3e4GD4VJOAipA27pWFd.png) What's the correct way to set that up?
Comments
UserSupport 3 years ago
You need to R6 if not convert to PCB
Reply
andyfierman 3 years ago
@UserSupport, @bryan_6020, This is a perfect demonstration of why I asked for this feature: [https://easyeda.com/forum/topic/Not-Connected-feature-for-unconnected-pads-in-Footprints-with-multuple-same-numbered-pads-on-PCB-03f61e1a8ed342b7a5be79e0dab765e5](https://easyeda.com/forum/topic/Not-Connected-feature-for-unconnected-pads-in-Footprints-with-multuple-same-numbered-pads-on-PCB-03f61e1a8ed342b7a5be79e0dab765e5)
Reply
bryan costanich 3 years ago
@UserSupport "You need to R6 if not convert to PCB" what does that even mean? can you reword it or elaborate, please?
Reply
UserSupport 3 years ago
Hi what do you want for this issue? I see it is correct, the pads have the same net has ratlines, you need to route them.
Reply
andyfierman 3 years ago
@UserSupport, If the symbol showed every pin separately then the Schematic "No Connect" "X" symbol could be placed on each pin that the user wishes to leave floating. That would solve the problem of leaving the pads unconnected in the in the PCB. In this symbol however, there is only one pin 6 that represents several pads on the Footprint, which is ok and a tidy way to represent the part. There may be cases where the user only needs to connect to one of the multiple internally connected pads and with symbols like this, my suggestion for a PCB "No Connect" tool would solve the problem in the PCB.
Reply
UserSupport 3 years ago
@andyfierman symbol doesn't support the pin number duplicated, it will make the network shorted if two differrent net connect with these pins.
Reply
andyfierman 3 years ago
@UserSupport, I understand that. My proposal does not require duplicate numbered pins on the symbol. It only asks for something that identifies selected pads with duplicated numbers on a Footprint as not connected in the PCB Editor.
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice