When using my Mod V5 (personal) PCB Module, the numbering gets scrambled , but only on the second placed. Diode and capacitor numbers get mixed around (ie get in the wrong place) The third and next copies are sequential and on the same spot as the 2nd copy. (still not same as 1st) This makes connecting it to a cematoc quite difficult when updating the PCB Not all modules i use have this problem btw, but this one does. Top: This is the first placed module, everything correct. Middle: C5 renumbered to C8 (in same location as C1) since there are 4 capacitors, C1+4=C5 C6 renumbered to C5 C7 renumbered to C6 C8 renumbered to C7 Diodes have the same continuance problem. On the bottom PCB, the numbers are sequential to the middle PCB