I'm using this EG2X-GL multi-part:
![Screenshot 2023-06-01 at 3.19.31 PM.png](//image.easyeda.com/pullimage/tHL3QBQRIDgFrGTxc6tCzjy7pHbIiQS44RlmSOgj.png)
in my schematic i have both symbol parts:
![Screenshot 2023-06-01 at 3.20.23 PM.png](//image.easyeda.com/pullimage/VkZn6dtnVa8Ii1tijs3bACVBNJASUUlisqroCygP.png)
but when i new'd up a PCB, it added two footprints for it:
![Screenshot 2023-06-01 at 3.21.24 PM.png](//image.easyeda.com/pullimage/mHwvSmiuVR3qBKolGxl1NIvbFQWW7bGJly07RCCY.png)
i'm not sure what i've done wrong in the symbol creation.
each sub part has to have a footprint associated with it, so it can align the pins in each sub part to the footprint:
![Screenshot 2023-06-01 at 3.22.13 PM.png](//image.easyeda.com/pullimage/FJ8gmRydQscY3QPdaVKKAdf8nn0uhEWpuNjDb9GJ.png)
![Screenshot 2023-06-01 at 3.23.08 PM.png](//image.easyeda.com/pullimage/K2WsiYLSKHsPJjD1lvOyh737xYe2aHLHRFKxQVrp.png)
I thought maybe i needed to remove it from the main symbol (EG2X-GL as opposed to EG2X-GL.1/.2) but then i got errors.
what am i doing wrong here?