You need to use EasyEDA editor to create some projects before publishing
Working with the Wiring tool
1478 11
dgschwartz-440 10 years ago
**BUG** When working with the wiring tool many strange things occur when moving the mouse around, the occurrences are intermittent. sometimes they are permanent or sometimes they disappear by their self but cause me problems and concerns. Wires (lines) disappear,junctions dots are added where they shouldn't be and I have lost confidence in the circuits I've already completed and must keep going back over my work. Concise problem statement: Steps to reproduce bug: 1. 2. 3. Results: Expected results: Url:<you url here>(click the Share my works button to get it) Browser:
Comments
dillon 10 years ago
Can you tell me which EDA software you used before trying EasyEDA? Can you spend some time to create a small schematic to reproduce the bugs. If you can tell us the steps which you reproduce wires lost and bad junctions, we are sure will fix it a few hours later. Up to now, you are the first guy who report this. Thanks.
Reply
dillon 10 years ago
I sent an email to U, please check it and drop me a reply. Thanks.
Reply
martin 10 years ago
I have also noted some weirdness since the last update...
Reply
example 10 years ago
Glad to see what are the weirdness , We really add some new features in this update :)
Reply
martin 10 years ago
Among other things, and I have no reproducible steps yet: 1. Sometimes, I can't place a part I am moving. Left click, right click, esc, the part is "stuck" to my cursor! Reloading the page fixes it. 2. I have also seen the junction point funkiness. I have two traces connecting, then move a trace, the junction point remains at the old position. I delete one of the traces, the junction point remains there! ...stuff like that. 3. I have had errors with the undo stack (EasyEDA reports an error when I hit Undo) 4. Undo sometimes doesn't actually undo the right operation, leaving me in a pretty scary state. This is something I noted in the past, but it seems worse now. 5. While I have your attention, here's a nitpick (feature request!): can the click hotspot be larger than the geometric shape itself (ie, I find it extremely annoying to try to select a ground symbol, or a trace...) 6. Another nitpick: man, the selection rectangle isn't obvious to figure out. Sometimes, it seems I have to select ALL of a symbol & its name and attributes with the rectangle, and other times, barely overlapping a symbol selects it. 7. Might as well point out: CTRL-click on a symbol should _toggle_ its selection state, not just select it. The idea is if my parts are too close, and I rectangle-select, I need to be able to selectively de-select some symbols. More where that came from :-) Thanks.
Reply
martin 10 years ago
Oh, yeah, another strange thing since last release... Hitting space-bar to rotate also seems to scroll my schematic, as if the key event weren't preventing default behaviour.
Reply
andyfierman 10 years ago
"Another nitpick: man, the selection rectangle isn't obvious to figure out. Sometimes, it seems I have to select ALL of a symbol & its name and attributes with the rectangle, and other times, barely overlapping a symbol selects it." Sorry if this is a stupid question but is the effect you are seeing due to this feature: [Select More Shapes]? :) [Select More Shapes]: https://easyeda.com/Doc/Tutorial/introductiontoEasyEDA.html#h.9uzhdxl4m0up
Reply
martin 10 years ago
Damn! Why, yes! OK, two things: 1. This is by far the most polite RTFM I've ever read :-) 2. That is _cryptic_. imho, needs to change...
Reply
example 10 years ago
"1. This is by far the most polite RTFM I've ever read" The benefit of several years of doing technical advice for the Moto Guzzi Club ... Some of those people were a lot bigger then me! " 2. That is _cryptic_. imho, needs to change..." >Politeness mode: engaged. >Tactful Text completion functions mode: Advanced Would you like to see the two modes - or the distinction between them - of the left-click and drag selection feature made more obvious to users? The problem is that there are so many features and functions in any piece of software as complex as EasyEDA that it is difficult to find a way to show them all in a quick and easily digestible way. Different users will find look for different *must-have* or *need-it-now* features To save people having to dig too deeply when they first start, we have tried to give users a very quick summary of the major features of EasyEDA in the [Introduction to EasyEDA] in the [Hotkeys] and [Basic Driving Skills] sections. The select box features are described in [Basic Driving Skills - Left Clicking]. Maybe a summary sheet under the `i` button would be a good idea. Or a rolling 'Tips' panel when EasyEDA opens? Put it in the [Tips & Skill] page? Suggestions as to how to present this sort of information in a more readily acessible way would certainly be welcome. ***:)*** [Introduction to EasyEDA]; https://easyeda.com/Doc/Tutorial/introductiontoEasyEDA.html [Hotkeys]: https://easyeda.com/Doc/Tutorial/introductiontoEasyEDA.html#h.ecuet67fgrsd [Basic Driving Skills]: https://easyeda.com/Doc/Tutorial/introductiontoEasyEDA.html#h.7ud4s0q6ijl8 [Basic Driving Skills - Left Clicking]: https://easyeda.com/Doc/Tutorial/introductiontoEasyEDA.html#h.s04xwqey36v2 [Tips & Skill]: https://easyeda.com/bbs_lists_4.htm
Reply
dillon 10 years ago
Hi, I really hope we can reproduce your problems. 2 maybe be fixed. 3 and 4 are true. There are some bugs in the undo and redo . The problem is that we can't know where are the problems. And the users don't like to tell us how to reproduce these problems, or they can't remember how to reproduce. The good news is that when Undo/redo bug happen, their works are not damanaged, We are try to write some codes to monitor these. 5 We know this a long long time. will find a way. Thanks
Reply
martin 10 years ago
Hey Dillon, I'll try to get some rep steps for undo/redo, but that's tough to track as the behaviour doesn't appear to be consistent...
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice