Your project is private so only you can see it to comment on.

Please uniquely identify which MOSFET irf3205s you are talking about and exactly which library it was selected from.

Depending on which of the System, LCSC  or JLCPCB libraries it came from then you can raise this issue with EasyEDA, LCSC or JLCPCB Support.

You may need to change the Category of this topic accordingly.

Please note that EasyEDA, LCSC and JLCPCB are not responsible for user contributed content.

Please also be aware that the link, (2) Welcome to EasyEDA, in the sticky topic prefaced [Must read] the top of the forum:

https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a

includes links to two essential checklists which include checks to ensure that the pin and pad mappings of symbols and footprints are correct to the datasheets of the selected components. The advice in these checklists applies irrespective of which library the symbols and footprints originate from.

You can reselect the part in the library and then do:

Right-click > Report Error

To change the symbol pin to footprint pad mappings:

https://docs.easyeda.com/en/Schematic/Footprint-Manager/index.html

@andyfierman hi here is the suppliers part and the footprint isnt user contributed. C2874633

@avel,

I suggest that

1. you do Report Error as described above and paste the link to this topic into it;
2. you also contact LCSC at:

https://www.lcsc.com/service/question



and include the link to this topic there too.

@UserSupport,

The Schematic Symbol pin to PCB Footprint pad mapping of this LCSC supplied symbol and part is incorrect.

Please compare the manufacturer's datasheet pin to pad mapping in:

https://datasheet.lcsc.com/lcsc/2211151800_JSMSEMI-IRF3205S_C2874633.pdf

from:

https://www.lcsc.com/product-detail/MOSFETs_JSMSEMI-IRF3205S_C2874633.html

with what is shown in the EasyEDA Footprint Manager:

@avel,

You should probably change the Category of this topic to LCSC.