Sorry but I don't understand the question. * If you have generated your Gerber files from a PCB (such as from Eagle) imported into, or created using, EasyEDA then all you have to do to move the silkscreen text to the desired position is to open your EasyEDA project, open the PCB and then move the relevant text as required, save the PCB file and regenerate the Gerber files. Note that if this is an EasyEDA Project then it is private so only you can see it. * If you have generated the Gerber files in a 3rd party PCB tool (such as Eagle) then you will have to edit the PCB and regenerate the Gerber files using that tool.

@andyfierman sorry I have used the wrong words. I have a position of my tPlace layer inside eagle, first image, but when i generate the Gerber file and loaded it on "easyeda.com/order", the Gerber have a wrong position of tPlace. I used the correct guide to generate it, link in the first post.

@Dave.Calaway Sorry **bPlace**

Please check your Gerber file using **gerbv**: http://gerbv.geda-project.org/ If it looks OK in **gerbv** then you are good to go. Also if it looks OK in **gerbv** but not in the EasyEDA Gerber Viewer, please post a Bug Report.

Solution. https://goo.gl/BKDy8Z

So is this an Eagle Gerber generation problem rather than an EasyEDA Gerber Viewer problem?