Solved... copper pad already connected ...

Unfortunetaly the copper pad was not already connected... so not solved :(

You have to give the copper area, pad or region the same net name as the net that you want to connect it to. **Beware**: if the copper pad in your pcb is something you have added after doing **Convert to PCB...** from the schematic then it may disappear the next time you do **Update PCB...** from the Schematic or **Import Changes...** from the PCB. Please read (4) in: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f)

You might also find this helpful: [https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1](https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1)

Thank you very much for your help