在线急等，盼高手不吝指教

https://easyeda.com/forum/topic/Rotation-4qkevN5nF

* 不支持以非90度步长旋转原理图符号。 旋转原理图符号，不是90度的倍数的任何角度都会使符号引脚离开网格。 如果你需要一个45度的符号，例如桥式整流器，那么你可以在原理图符号编辑器中创建自己的符号，使用引脚在网格上。 * Rotation of schematic symbols by other than 90 degree steps is not supported. Rotating a schematic symbol both any angle that is not a multiple of 90 degree will put the symbols pins off grid. If yo need a symbol at 45 degrees, such as a bridge rectifier, then you can create your own symbol, with the pins on-grid, in the schematic symbol editor.