Translation: Every time I want to route automatically I can not.  What is the use of designing a scheme, if then I can not route automatically?  For that, there is no need for a scheme, because I have to redesign it when making the PCB.  I tried to do it locally and it does not work either.Is there a solution to this or do I definitely have to look for other program options than EasyEda? Chrome 68.0.3440.106 OS X 10\_13\_6 EasyEDA5.7.26

@ Rafaellaserna01, brinde más información sobre este tema. ¿Puedes compartir un proyecto público para que investiguemos? @Rafaellaserna01, please provide more information about this issue. Can you share a public project for us to investigate?


Es difícil ver cuál podría ser el problema de las capturas de pantalla, pero la ubicación de los componentes está tan ajustada que, a menos que use más de 2 capas, puede que no sea posible enrutar su diseño con un trazador automático. Si puede compartir el proyecto de forma pública o privada con asistencia, podremos ofrecerle más consejos. [https://docs.easyeda.com/en/Introduction/Share-to-Public/index.html](https://docs.easyeda.com/en/Introduction/Share-to-Public/index.html) It is difficult to see what the problem might be from your screenshots but the component placement is so closely packed that, unless you are using more than 2 layers, it may not be possible to route your layout using an autorouter. If you can share the project publically or privately with support, we may be able to offer more advice. [https://docs.easyeda.com/en/Introduction/Share-to-Public/index.html](https://docs.easyeda.com/en/Introduction/Share-to-Public/index.html)

También debe compartir cómo ha configurado el trazador automático. You also need to share how you have configured the autorouter.