incorrectly displays holes with negative coordinates in DRL file
lmatsiev 6 months ago
**BUG** Concise problem statement: DRL files may contain holes with negative coordinates. While generating Fabrication output DRL files EasyEDA overwrites the first leading "0" with "-" sign when hole coordinate(s) is (are) negative. When such DRL is viewed using all holes with negative coordinates are displayed 10 times further away from the origin than supposed. Steps to reproduce bug: Load any fabrication output with DRL file(s) containing holes with negative coordinates. Results: Watch the holes with negative coordinates displayed far away from their expected locations. Expected results: Holes displayed at their normal locations as specified in the original design. Manual fix: Open DRL file(s) with any text editor, find all "-" and replace with "-0", save and reload the fabrication output. Watch the holes displayed in their proper places (unless the design is larger than 10' in one or both dimensions). Browser: Chrome
Login or Register to add a comment
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在 打开保存即可。
有问题联系QQ 3001956291 不再提醒