Please could you help a beginner? I am struggling with forming a copper ground plane. I have followed the tutorial instructions,
but cannot see any solid area after or before the rebuild. I assume I'm missing some step.
I do have an issue with the copper layer. The board has 4 layers and I need one ground (GND) layer. Do I have to generate 4 copper layers manually? In the Layer Manager is specify 'Inner1' as 'plane'. If I look at the Copper Area Manager, the 'Inner1' is not selectable.Please tell me what to do.
I've tried different ways of doing this, even if I manage to have a layer dedicated to GND there are no vias next to the smt ground pad, which I expected.
Another request, how do I avoid vias inside the component area?
Thank you!
Regards Jan
Your project is private so only you can see it.
Please read:
[https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)
Please also see:
[https://easyeda.com/forum/topic/How-to-avoid-DRC-errors-when-connecting-to-PCB-Footprints-a-k-a-PCB-Libs-90bf944fe3644b21a7d27a9e9d8df8d6](https://easyeda.com/forum/topic/How-to-avoid-DRC-errors-when-connecting-to-PCB-Footprints-a-k-a-PCB-Libs-90bf944fe3644b21a7d27a9e9d8df8d6)
[https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1](https://easyeda.com/forum/topic/How-to-place-multiple-vias-in-a-PCB-footprint-a34cf68d58414138898a56de60abd8c1)
Thank you for a quick reply.
I've made a testboard called 'Ground plane test' public.
For a 2 layer board I may generate ground (GND) plane and even select between top/bottom layer. I've made one copper layer from 'PCB tools'.
GND to U1 is connected to the bottom layer through a via (ref.picture), however I'm not able to specify 'plane' for the bottom layer in the 'Layer Manager' to avoid routing, is this a limitation?.
![image.png](//image.easyeda.com/pullimage/achSTMLhXQrQxlfrnYoMdO6Uo2RQi2j9eFXTri6e.png)
When specifying 4 layers and 'Inner1' to 'plane', I'm not able to select 'Inner1' as GND, it's not selectable.
I have an idea that this should be possible.
Please inform.
Thanks!
Jan
@janrichardbecke,
This is a different question from the OPs topic.
As requested in:
[https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)
please:
1. repost this as a new topic and;
2. post the url to your public project.
Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice