You can create your own PCB footprints in EasyEDA. You needed to do a bit of Googling to find the Smartcard contact definitions and dimensions but eventually you should have been able to find this: https://www.maximintegrated.com/en/app-notes/index.mvp/id/4029 in the section on: **Smart Card Contacts** where **Table 1** gives all the relevant information.

You'll find various Schematic Symbols by looking in the in SHIFT+F Search for **Smartcard** or **SIM**

I have the smard card contact,Only need how to define the package or how to create a newone? to make the pcb.Thanks

Please study our Tutorial and look for the sections on creating PCB Libs.

https://easyeda.com/Doc/Tutorial/PCBLib.htm#Creating-The-PCB-Libs

@yaqui, If you can choose a connector type that you need from one of these: https://lcsc.com/products/Card-Sockets_637.html then I can build you a Schematic Symbol and a PCB footprint. :)

If you already have the smartcard contact, can you post a link to the datasheet for schematic and PCB footprint dimensional information?

Hello Every one, I am trying to make a pcb with the pads of smart cards, the original file is in Eagle format, I imported the file from eagle format.the pads is ready has the corrent position. I attached the eagle files.thanks for you support.[enter link description here][1] ![enter image description here][2] [1]: https://easyeda.com/editor#id=cd4819d2a2fc4be4a9212c3eb78e2150 [2]: /editor/20171104/59fcb4b988001.png

Please see the posts by `components` above. Please also have a look at the following Schematic Symbol and PCB packages in the **SHIFT+F** parts search: ![enter image description here][1] * Your imported Eagle file looks like the contacts are inverted top to bottom compared to Table 1 in: https://www.maximintegrated.com/en/app-notes/index.mvp/id/4029 [1]: /editor/20171104/59fcbf6236e49.png