For the sake of your sanity and ours, please read: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)

thanks for replying and do you no how i rotate a component to any angle i wont

want i meant sorry

@nathan2020 Select it and press space key

thanks for reply but do you no how i make it to 45% when i press space it only turns 90%

Schematic only support to rotate 90 degree

o thanks much you have saved me so much time i was looking on google i would have been looking for days haha do you no how i change my schematic to pcb i do every think what people do on youtube but when i do it it dose nothing

[https://docs.easyeda.com/en/Schematic/Convert-to-PCB/index.html](https://docs.easyeda.com/en/Schematic/Convert-to-PCB/index.html)

@nathan2020, * About rotating Schematic Symbols: [https://easyeda\.com/forum/topic/Can\_I\_place\_components\_at\_45\_or\_60\_degree\_angle\_in\_SCHEMATIC\-7HBTb4mEW](https://easyeda.com/forum/topic/Can_I_place_components_at_45_or_60_degree_angle_in_SCHEMATIC-7HBTb4mEW) [https://easyeda.com/forum/topic/Rotate_Component-IGARL3lDV](https://easyeda.com/forum/topic/Rotate_Component-IGARL3lDV) * About rotating PCB Footprints in the PCB: [https://easyeda.com/forum/topic/Rotation-4qkevN5nF](https://easyeda.com/forum/topic/Rotation-4qkevN5nF)