`https://easyeda.com/forum/topic/Image_as_copper_zone-ldJDUc6oG` Do you mean so that the image appears on the finished PCB or do you mean just as a background to your PCB Editor page? Please see this thread: https://easyeda.com/forum/topic/Image_as_copper_zone-ldJDUc6oG

firstly , thank you for your reply ... i want to insert an image as a background of PCB editor .. is it possible ??

1) If you want to import an image like a wallpaper on a Desktop then sorry but this is not possible in the PCB Editor. 2) If you want to import an image so you can draw round or over it like to trace out a photo of a PCB then use the process I described in the link but import or move the picture into the **Document** layer. If you can get your image into a DXF format then you can use **Import DXF**. An image imported this way is only 100% 'black' or 100% 'white' i.e. it has no grey scale information.

ok , thank you ,,,, just i wanted to adjust a push puttoms on the PCB depending on a picture that determone the push bottoms locations ....

In that case, to maintain the correct dimensions, generate a DXF of the image you want to use as a template and import that into the Document layer.

ok.. i will look for how to convert an image to DXf : ) ... thank you very much for your cooperation.

There are some free online tools that can do that as well as some FOSS tools. If converting from something like a JPEG to DXF, check the dimensions after converting.

Yes you can. just simply import the image and place it anywhere you want, then click the image again and go to the format section on the top left of easyEDA then click send to back.