Thanks for your report

also the text size,location,format are not imported correctly

how can i make a drill in EasyEDA PCB editor

If you mean how can you place a drill hole then please see:

https://easyeda.com/Doc/Tutorial/PCB.htm#HOLE

You can also make a hole simply by placing a Via or a Pad and making the outer diameter about 127 microns (5 mil) larger than the inner.

For arbitrary shaped holes, please also see:

https://easyeda.com/Doc/Tutorial/PCB.htm#Solid-Region-in-PCB

so please change the importing process to translate EAGLE milling layer 46
to EasyEDA NPTH solid area

Will keep it. Maybe you can add NPTH manually at present.

After import from eagle sch file I sea a net lines but they are not connected into the next target (they are only painted). Do I sth wrong ?

@Wegi1, can you give us an image?

After replace to properly package type for elements - not any one connection is present for PCB preview

@Wegi1, can you send your gerber file to support@easyeda.com ?

I did.

Regards

@dillon NPTH in EasyEDA is too much hard to make it looks fine and takes along time and it's not always correctly shaped.
but in EAGLE for example us juest use the wire tool(pen like tool) and draw your line after selecting the width and the proper layer in that case i just draw my actual drill space - layer 46 - and again over lay it with wider width than drilled space from both sides in restricted layers - 41,42,43 - so auto route will not use that space for top , bottom and via layer.

also text and silk screen font size and location is missed up.

also in schematic importing all in my case every pin is snapped correctly but the text is missed up.

i can just use Gerber exported files from EAGLE but i have a coupon and to use it i must use EasyEDA editor and the project is public.

that's OK but no option to make my Gerber file public and use the coupon ??

@dillon also the imported EAGLE project - sch and brd - files has no Conscience changes in one of them will not reflect to
the other file

@Scropion86 yes, the import is not very good, this is why we add a note be careful.
I think you can use your coupon when you use the gerber order directly.

@dillon no as per chat support i must be use it for layout created in EasyEDA and the project should be public
and the shipping cost should paid not from the coupon value
btw mu coupon is $ 50

Yes, the shipping cost not be included.

@support i have no problem to pay for the shipping .
so you can't allow me to use my coupon to order using Gerber files ,as now this coupon
is not usable for me as designing my board through EasyEDA will be almost impossible because the
route layer implementation in EasyEDA is very hard to use as you have to use NPTH unregulated shaped dragged by mouse
to create a straight lines.

please let me know if it's possible to use the coupon with Gerber files thanks.

@Scropion86 Yes, you can use the coupon with Gerber files, try it at https://beta.easyeda.com/order

@Scropion86 , Your last reply show your address and other privacy, and we help you to hide it. and a message send to your message inbox.

sorry , and thanks for that , please note that i just attached a not completed Gerber project just for showing you
that i can't order it.

once i upload my final project i will let you know to apply the coupon for it.

i cannot find tutorial/instruction on how to open/import BRD file to easyEDA... pls help. thanks!

@kpgrafix https://docs.easyeda.com/en/Import/Import-Eagle/index.html