Please refer to: [https://easyeda.com/forum/topic/Complete-beginner-with-schematic-Net-errors-13d050c8c2c54397b9bf97de9ff73338](https://easyeda.com/forum/topic/Complete-beginner-with-schematic-Net-errors-13d050c8c2c54397b9bf97de9ff73338)

@andyfierman thanks for your support. i finsihed it and rectified my error. thanks again

@andyfierman I got one different problem in my schematics might be a bug, suddenly my all nets not working and i choose wire to rewire them but it didnot work. will u plz support on this.

I think there is still an issue here.: Do this as an experiment, see if you will notice the issue. Take a PCB design that has lots of resistors, and in the schematic, change all the resistor numbers.  Then update the PCB.  You will see a net error for every one of them, of course, because the net name no longer matches the part. I fix this by changing the name of the net in its attribute menu.  But,you will also get 1 or 2 net errors that don't make sense.  The only way to fix is to delete the net and rewire it.

I think there is still an issue here.: Do this as an experiment, see if you will notice the issue. Take a PCB design that has lots of resistors, and in the schematic, change all the resistor numbers.  Then update the PCB.  You will see a net error for every one of them, of course, because the net name no longer matches the part. I fix this by changing the name of the net in its attribute menu.  But,you will also get 1 or 2 net errors that don't make sense.  The only way to fix is to delete the net and rewire it.

@JRGlueck, @vikramnain20, Please repost as a new Bug Report and provide a link to a public project that demonstrates this issue. Thanks.

@andyfierman @JRGlueck Thanks for support. Find the link is shared below.... [https://easyeda\.com/editor\#id=\|6b59490170134504a6cb14b8804f7df7\|aae50e5dfc9e4265aeb226e1ea2e85e1](https://easyeda.com/editor#id=|6b59490170134504a6cb14b8804f7df7|aae50e5dfc9e4265aeb226e1ea2e85e1)