how set initial condition to zero for transient analysis?

Hi Ianicek, Please see: <https://easyeda.com/file_view_Setting-initial-circuit-conditions-01_hZXjgCYWU.htm> <https://easyeda.com/file_view_Setting-initial-circuit-conditions-02_Emy7tPbxv.htm> <https://easyeda.com/file_view_Setting-initial-circuit-conditions-03_bBJe82kCw.htm> <https://easyeda.com/file_view_Setting-initial-circuit-conditions-04_SKSMic60h.htm> and the files about configuring SINE, PULSE etc., sources, looking for descriptions of Initial Levels and DC offsets: <https://easyeda.com/file_view_Spice-Sinusoidal-Source_cw641ZlxT.htm> <https://easyeda.com/file_view_Spice-Sinusoidal-Source-more-examples_vLFyQ82kC.htm> <https://easyeda.com/file_view_Spice-PULSE-Source_XPJDUcuoG.htm> <https://easyeda.com/file_view_Spice-PULSE-Source-more-examples_oOICUcun3.htm> <https://easyeda.com/file_view_Spice-EXP-Source_cewqI0hzR.htm> <https://easyeda.com/file_view_Spice-SFFM-Source_SwqI0izRL.htm> <https://easyeda.com/file_view_Spice-AM-Source_KGZNnJtdX.htm> <https://easyeda.com/file_view_Spice-PWL-Source_wxhbHBvN5.htm> All in: <https://easyeda.com/project_view_Spice-tutorials_AysKEWevN.htm> which I think you already have made a clone of. Questions? Just ask. (But please give a little more information in your questions). :)

See also: <https://easyeda.com/file_view_About-spice-analyses-in-EasyEDA_CNHZFztL3.htm>

thanks, I finally used placed to the schematic .TRAN 10U 5M UIC and run the circuit shortkey CTRL R ... and it is run OK