I am using a 10w power LED, measuring 17mm x 13mm.
but i can't find any 10 LED's. Where do I look ? I would rather find one than draw one so I can use the simulator.
I am using a 10w power LED, measuring 17mm x 13mm.
but i can't find any 10 LED's. Where do I look ? I would rather find one than draw one so I can use the simulator.
@Tutorials
i will try that. but i created a part for the BH_1750FVI GY-30 Light Sensor, and before it would accept it into the PCB portion, it said i must assign it a package.
i have tried like hell to figure out what package corresponds to this little arduino sensor (mouser, digikey, ebay, etc.) but nobody has them, or if they do, they don't say what package it is.
how can i see a selection of packages in easyeda, without having to go thru them 1 by 1 (there are a lot of them).
@pratto10,
https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f
@pratto10,
There are several PCB footprints for variants of the BH_1750FVI GY-30 Light Sensor in the EasyEDA library. You just need to be a bit more lateral in your search criteria.
:)
Try searching in:
The Search box at the tiop of the home page
or;
Resource > Component (https://easyeda.com/component)
or;
Resource > User Component (https://easyeda.com/component/user)
for:
1750
You're going to use it anyway so buy a module and measure it?
Alternatively, there are several places online that show a datasheet (bh1750fvi-e.pdf) for the sensor chip and schematics for the module (https://www.addicore.com/BH1750FVI-p/ad290.htm) so you could design your own PCB for the module (or just design it directly onto the target PCB).
Our search is not good enough now, please search on lcsc.com and copy it's Mfr.Part #: on the "Parts", if you don't find the part as you want, you can create one.
https://easyeda.com/Doc/Tutorial/SchematicLibs.htm#Creating-the-Schematic-Libs