https://easyeda.com/my-projects

дилон, вы дурак. ссылка не работает. если нечего сказать, не говорите, будете казаться умнее.

FAIF_22_10, Добро пожаловать в EasyEDA. EasyEDA было крупное обновление на 16 октября: https://easyeda.com/Doc/Tutorial/new-v-3.10.htm Многое изменилось с обновлением и многие из наших пользователей были проблемы с поиском вещей с тех пор. Большинство поиск по всему форуму первой и, если они не могут найти ответ на свой вопрос, а затем вежливо попросить о помощи, и, как правило, получают его в течение нескольких часов. Таким образом, почти все довольны. Это непрактично, чтобы пройти через все прошлые посты, чтобы обновить все ссылки, которые могут быть изменены в обновлении, но если бы вы взяли немного времени и усилий, вы нашли бы это: https://easyeda.com/forum/topic/Project_management_in_EasyEDA_V3_10_x_onwards-ciuQpnJVv. Возможно, в следующий раз, когда вы будете отправлять вам положить в немного больше усилий, прежде чем быть очень груб к одному из основателей EasyEDA. ******* FAIF_22_10, Welcome to EasyEDA. EasyEDA had a major upgrade on Oct 16: https://easyeda.com/Doc/Tutorial/new-v-3.10.htm Many things have changed with the upgrade and many of our users have had problems finding things since then. Most search around the forum first and, if they cannot find an answer to their question, then ask politely for help and usually receive it within a few hours. That way just about everyone is happy. It is impractical to go through all past posts to update all the links that may have changed in the upgrade but if you had taken a little time and effort, you would have found this: https://easyeda.com/forum/topic/Project_management_in_EasyEDA_V3_10_x_onwards-ciuQpnJVv. Perhaps next time you post you will put in a little more effort before being very rude to one of the founders of EasyEDA.

I do apologize about what FAIF_22_10 said

I rather think it is for FAIF_22_10 to apologise. :?

Please accept my apologies.   We were specific plans for this program, but they did not materialize. so very upset.    I have not figured out how to open their projects, it is necessary to open them as if they are lost. and it is not convenient. I think this will be my first and last project in this program. program so uncomfortable.

all links proposed were useless

@FAIF_22_10 all your files are there, we even have a version backup.

thanks FAIF_22_10 :) my experience was well, ask me if I can help. I even made some pcb-libs by andy' aid

hi is it possible to convert the project outputs (gerber files) into .pcb files or other Altium project files?

@FAIF_22_10, I am sorry that your experience of EasyEDA so far has not been satisfactory: `all links proposed were useless` If you could you post some examples of the links that don't work for you, we may be able to improve your view of EasyEDA. Thanks.

@Abdolhamednik, Thank you for your support. :) `is it possible to convert the project outputs (gerber files) into .pcb files or other Altium project files?` It is not possible to convert Gerber files into Altium .pcb files from within EasyEDA. It is also not possible to export EasyEDA PCB JSON files in Altium .pcb file format from within EasyEDA. I dooubt that Altium supports JSON import in any way that will recognise EasyEDA file format. It may be possible to write a utility that can convert EasyEDA JSON files into something that Altium can import but that is beyond what we have the resource to do at present. * However, 1) in Altium it is possible to import a set of Gerber files and 2) from EasyEDA it is possible to export a schematic netlist to Altium: ![enter image description here][1] Then, in Altium, it is possible to reverse engineer the Gerbers and the netlist to generate a set of Altium PCB files. This can be quite tricky and may depend on what tools you have available in your Altium installation. [1]: /editor/20161025/580f21a4d8d72.png

thank you very much for your understanding and responsiveness. I did not expect that I will get as fast response to your comment. program to have a new, and not their native language. because of this, have to overcome some difficulties. I would like that to other users have experienced my problems. I could help you with the translation of the instructions for the program in the Russian language. (большое спасибо за понимание и отзывчивость. не ожидал что получу так быстро ответ на свой комментарий. программа для меня новая, и на не родном языке. из-за этого приходиться преодолевать определенные трудности. хотелось бы, что бы другие пользователи не испытывали моих проблем. я бы мог помочь вам с переводом инструкции к программе на русский язык.)

@FAIF_22_10 Если вы могли бы помочь с переводом некоторых из нашей документации, которая будет большим подспорьем. :) https://easyeda.com/contribute https://github.com/dillonHe/EasyEDA-Documents ![enter image description here][1] If you could help with translating some of our documentation that would be a great help. :) [1]: /editor/20161026/580fdc450c86c.png