So, assuming that your public project: https://easyeda.com/busman3856/train_controller-b8c61ff7399d497fbc3665e580434f0b is the one you are asking about, I don't understand your problem. I forked your project. Here is my unaltered clone of your schematic: ![enter image description here][1] and when I press: ![enter image description here][2] then I get an untracked PCB as I would expect: ![enter image description here][3] [1]: /editor/20170605/59348449c840f.png [2]: /editor/20170605/59348a8196a19.png [3]: /editor/20170605/59348a1c97c81.png

i got that far but then things went tricky . just couldnt get to grips with it

Select the Track tool: ![enter image description here][1] and then join up the device pins. As you do this, the blue "ratlines" will be replaced with tracks. You can put tracks on top and bottom layers. Please see the Tutorial: https://easyeda.com/Doc/Tutorial/PCB.htm#PCB-Design-Editor [1]: /editor/20170606/5935a001c2e64.png