I did read other threads, I did look at tutorials. I created this uber simple transistor circuit: https://easyeda.com/norq/test_transistor-a44ec9ba694849e084c7208628dcb19c
I then simulated it (transient, 1u, 1m). **vout** shows as 12 volts, as if the transistor is off, but my calculations say that it should be on, and that vout should be 5-Vbe+Vce(on), around 4.4 volts ... what am I doing wrong? how can I see it in the simulation?
I chose the BC846 from Parts > Search "bc846" > System components > chose one of them
Many thanks in advance
