Hi, Im a rookie at this but I want to try and get better with time. im creating a schematic of a PCB for a CRT controler. can anyone nguide me on wich _Potentiometer I could use for this to work. Thanks_
Your schematic is wrong because you have not connected the pot sliders correctly.
Wires connect to component pins or other wires. They do not connect to the outlines of schematic symbols.
You must also define what it is you are trying to design before you start and especially before you ask other people to help you.
How can you expect anyone to advise on your component choices if you have given absolutely no information about the purpose and function of the circuit, component values, circuit voltages or currents, power ratings, physical constraints?
Please read:
[https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f)
I want to apologize if I have offended you or anyone on this forum. I have never work on any of this but are very interested now that I'm collecting arcades. I try to follow the schematic of this original PCB and this is what I came up with. I know some electronics components but I'm very raw at this. I'm very thankful for the help and the support and very happy and thankful for your comments and advice. I will read and try to follow your direction because I want to learn and get better at it.
Thx
Joe
this remote card on the bottom is what Im trying to replicate. Can you advice please![IMG_1294.jpg](//image.easyeda.com/pullimage/yHfeWdJnUrEc2iMrYVWzzdt6rT2PeGFFQfx9c2mF.jpeg)
Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice