@maxim4, Thank you for your report but there does not appear to be any inconsistency in this part: ![enter image description here][1] https://lcsc.com/search?q=4D03WGJ0102T5E * The symbol to footprint pin mapping is correct for the part as described in the device datasheet: https://datasheet.lcsc.com/szlcsc/1KR-102-5_C20197.pdf ![enter image description here][2] * The footprint for the 4D03WGJ0102T5E quad resistor pack is also correctly dimensioned for the part as described in that device datasheet. ![enter image description here][3] ![enter image description here][4] ![enter image description here][5] * The Silkscreen outline is suitably spaced away from the pads to facilitate either hand or automated soldering and rework. [1]: /editor/20180221/5a8d3e449ee78.png [2]: /editor/20180221/5a8d3ea415321.png [3]: /editor/20180221/5a8d3d4932d2a.png [4]: /editor/20180221/5a8d3d673de74.png [5]: /editor/20180221/5a8d3d7e814e7.png

sorry ,your right. I have bought 4d02 in a bag labeled 4D03...

If you ordered these parts from LCSC, please contact via: https://support.lcsc.com/article/171-contact-us

no, it's not your fault.