Hi standing, Welcome to EasyEDA. Could you please post a link to the Finder relay that you want to use? Thanks.

@andyfierman Hi, here's the link [Link to footprint finder 34.51..][1] [1]: https://easyeda.com/component/FINDER_34_51-50400cba2b244be88891f503313b29d6 Thanks

Hi staudi, Thanks. Sorry about Autocorrupt messing up your username...

Sorry, I meant to the manufacturer's datasheet.

Hi staudi, PCB footprints in EasyEDA are always viewed from the component side. In other words, looking down onto the top of the component as it is placed on a PCB. Therefore the PCB footprint you have found is wrong because it is mirror imaged from what is required for this relay. However, please note that this PCB footprint is a User Contributed footprint so it is up to the individual user to check it, exactly as you have done. A correct footprint will be added to the EasyEDA library in the next week but in the meanwhile you can simply clone the existing footprint with a unique name and a description including a link to the manufacturer's part page and datasheet. Then you can edit it to shift the part outline on the silkscreen layer to the left, then save your edited footprint.

Hi andyfierman, [Link to manufacturer datasheet][1] [1]: http://www.produktinfo.conrad.com/datenblaetter/500000-524999/502867-da-01-en-REL__NORM_12V_DC_SERIE_34.pdf There are some more wrong footprints from this component ![wrong footprints][2] [2]: /editor/20180215/5a8534cf6b658.png I think i have to be very carefull by using parts from a user library greetings staudi

Search for: `34.51` and find the (correct) SIL and Flatpack versions in: `System Copmponents`.

Typo... Search for: `34.51` and find the (correct) SIL and Flatpack versions in: `System Components`.