Go through the checklists, (4) and (6) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)<br> <br> and use the Schematic and the PCB Design Managers to investigate your connectivity.

I have repeated the connections over and over again without success, maybe I am not drawing the lines correctly, I have tried every way I can think of, everything seems correct, the lines line up well with the components, the splice marks appear, but it seems that there is still no connection.

"I wanted to know if later I can make the project private again after the check." You can toggle Public/Private by doing:  which then opens:  Then **Save**.

Thank you andyfierman, I've been going over your advice again, but I'm not making any progress, I need a good clue to start working in the right direction. would you be so kind as to check my project? Esquembri/conmxlrv3-0 Thanks.

Please  post the complete url. Thsnks.

[https://easyeda\.com/editor\#id=\|a264762051864f07abffa24469c4552f\|6a22b6769af143f09ca114cd0a23b929](https://easyeda.com/editor#id=|a264762051864f07abffa24469c4552f|6a22b6769af143f09ca114cd0a23b929)<br> <br>

"...when I create the gerber file, it warns me of connection errors..." No it doesn't. It shows this question:  If you follow the checklist as advised in (6) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)<br> <br> then you will have already run the DRC checks in the PCB Design Manager and corrected any DRC errors so that the last time you run it, you have no DRC errors as shown in the screenshot above. Once you have zero DRC errors, you can click "**No, Generate Gerber.**" So it looks like you are good to generate your Gerbers and then check them in gerbv before submitting them to JLCPCB for manufacture :) <br> <br>

thank you very much andyfierman, I think I got lost at some point, and then I was looking at the warnings in the schematic. Then I will go ahead and place the order, thanks again for your time. Edu