![Byte_My_Void](https://easyeda.com/images/avatar-default.png)
easy eda quits session when internet connection lost.
posted by Byte_My_Void ,
11 months ago.
replied by haidy_easyeda ,
11 months ago.
![bijanmohandes](https://easyeda.com/images/avatar-default.png)
3D Model import support
posted by bijanmohandes ,
11 months ago.
replied by haidy_easyeda ,
11 months ago.
Update reuse block [EasyEDA Pro]
posted by Guilherme Fuzato ,
11 months ago.
replied by tokyodave ,
2 days ago.
![teszt](https://easyeda.com/images/avatar-default.png)
Open in New Window doesn't work
posted by teszt ,
11 months ago.
replied by haidy_easyeda ,
11 months ago.
How many parts can be 3D Viewed in STD 6.5.34?
posted by clispe h ,
11 months ago.
replied by andyfierman ,
11 months ago.
![AlanDaniells](https://easyeda.com/images/avatar-default.png)
What is the component marking layer for in a footprint?
posted by AlanDaniells ,
11 months ago.
replied by AlanDaniells ,
11 months ago.
3D Export only exports random subset of components
posted by Hamid Moazed ,
11 months ago.
replied by UserSupport ,
11 months ago.
![Cocaine](https://easyeda.com/images/avatar-default.png)
How can I create PCB variants?
posted by Cocaine ,
11 months ago.
replied by andyfierman ,
11 months ago.
![lynxlabeling](https://easyeda.com/images/avatar-default.png)
Importing Net Names from Schematic are messed up
posted by lynxlabeling ,
11 months ago.
replied by haidy_easyeda ,
11 months ago.
Subpart incorrect numbering
posted by Janic ,
11 months ago.
replied by Philip Allen ,
9 months ago.
![woodlabceti](https://easyeda.com/images/avatar-default.png)
Wire not following footprint when it is moved
posted by woodlabceti ,
11 months ago.
replied by woodlabceti ,
11 months ago.
![artautotterofthereindeers](https://easyeda.com/images/avatar-default.png)
I'm trying to remake an Emax I-style CPU board and a new Panel/Switch board for my Roland S-550, any advice or guidance about please?
posted by artautotterofthereindeers ,
11 months ago.
replied by andyfierman ,
10 months ago.
![Calum22](https://lh5.googleusercontent.com/-eLrG7arD6_0/AAAAAAAAAAI/AAAAAAAAAAA/ABtNlbCIV-6KShZE8gEk4GV_TQ39evreww/mo/photo.jpg)
How to v-score boards when not panelising for JLCPCB assembly with easyedapro
posted by Calum22 ,
11 months ago.
replied by andyfierman ,
11 months ago.
![danielvelascocuentaestudiantil](https://easyeda.com/images/avatar-default.png)
What is happening because it gives me an error
posted by danielvelascocuentaestudiantil ,
11 months ago.
replied by andyfierman ,
11 months ago.
![alexx110220](https://easyeda.com/images/avatar-default.png)
holes invisible after 'update pcb' with new design. new holes can be placed but they are also invisible and uneditable
posted by alexx110220 ,
11 months ago.
replied by alexx110220 ,
11 months ago.
![jraycec](https://easyeda.com/images/avatar-default.png)
Multiple similar pcb modules can not run checks
posted by jraycec ,
11 months ago.
replied by andyfierman ,
11 months ago.
![carlberg](https://easyeda.com/images/avatar-default.png)
Default Properties used when placing device/component in schematic
posted by carlberg ,
11 months ago.
replied by UserSupport ,
11 months ago.
![nostaticatall](https://easyeda.com/images/avatar-default.png)
EasyEDA Std and Pro on the same computer?
posted by nostaticatall ,
11 months ago.
replied by nostaticatall ,
11 months ago.