Mouse wheel zoom not working on Firefox
posted by MikeDB , 2 years ago.
replied by andyfierman , 2 years ago.
Solder Mask thermal conductivity
posted by MikeDB , 2 years ago.
replied by andyfierman , 2 years ago.
Have two different PCB track thicknesses on the PCB Tools Window
posted by MikeDB , 3 years ago.
replied by andyfierman , 3 years ago.
Naming of Nets without a Net Label
posted by MikeDB , 3 years ago.
DRC takes several minutes to begin after clicking on it
posted by MikeDB , 3 years ago.
Silk screen on Aluminium PCBs
posted by MikeDB , 3 years ago.
replied by JLCPCBsupport , 3 years ago.
Why do LCSC and JLCPCB keep logging me out ?
posted by MikeDB , 3 years ago.
replied by JLCPCBsupport , 3 years ago.
Why do LCSC and JLCPCB keep logging me out ?
posted by MikeDB , 3 years ago.
Why do LCSC and JLCPCB keep logging me out ?
posted by MikeDB , 3 years ago.
Why do LCSC and JLCPCB keep logging me out ?
posted by MikeDB , 3 years ago.
Why do LCSC and JLCPCB keep logging me out ?
posted by MikeDB , 3 years ago.
Loading components at an angle
posted by MikeDB , 3 years ago.
replied by JLCPCBsupport , 3 years ago.
Block move loses some connections
posted by MikeDB , 3 years ago.
replied by andyfierman , 3 years ago.
Anybody used Aluminium PCBs as Front Panels ?
posted by MikeDB , 3 years ago.
Which is the best footprint for JLCPCB assembly - 0603 or R0603 ?
posted by MikeDB , 3 years ago.
replied by andyfierman , 3 years ago.
Same component with different footprint name
posted by MikeDB , 3 years ago.
Can we have a feature that automatically adds Basic Part or Extended Part to every component in the BOM ?
posted by MikeDB , 3 years ago.
How do I have just 2 (or even 1) PCB loaded ?
posted by MikeDB , 3 years ago.
replied by andyfierman , 3 years ago.
Is there a way to detect anything on a silk layer overlapping exposed copper (such as pads) ?
posted by MikeDB , 3 years ago.
replied by UserSupport , 3 years ago.
Updating PCB from schematic using "Update Track Names" doesn't update the names on Copper Areas
posted by MikeDB , 4 years ago.
Please remove parts from JLCPCB Extended list if they are not available
posted by MikeDB , 4 years ago.
replied by JLCPCBsupport , 4 years ago.
Integrate the DFM program the SMD fabrication people at JLCPCB use into EasyEDA
posted by MikeDB , 4 years ago.
Teardrops being placed that fail DRC
posted by MikeDB , 4 years ago.
EasyEDA server running slowly
posted by MikeDB , 4 years ago.
Has anybody implemented a divide by 2 using just Basic SMD IC ?
posted by MikeDB , 4 years ago.
replied by andyfierman , 4 years ago.
Electrolytic SMD capacitor as basic part
posted by MikeDB , 4 years ago.
replied by daxliniere , 8 months ago.
Has anybody seen the origin suddenly move without doing anything ?
posted by MikeDB , 4 years ago.
Is there any way to rip up just part of a layout ?
posted by MikeDB , 4 years ago.
replied by UserSupport , 4 years ago.
Can I backorder a part at LCSC and have it sent to JLCPCB for assembly ?
posted by MikeDB , 4 years ago.
replied by JLCPCBsupport , 4 years ago.
For the JLCPCB assembly service can I abut resistors end to end ?
posted by MikeDB , 4 years ago.
replied by UserSupport , 4 years ago.
Is there any way of mirroring a PCB module ?
posted by MikeDB , 4 years ago.
replied by andyfierman , 4 years ago.
Is there any way to align Net Labels ?
posted by MikeDB , 4 years ago.
replied by andreasbernhofer , 4 years ago.
0603 resistor pads
posted by MikeDB , 4 years ago.
Annotation shouldn't repartion multiple op-amps or logic gates
posted by MikeDB , 4 years ago.
replied by UserSupport , 4 years ago.
Saving a file to a new name messes up PCB placements
posted by MikeDB , 4 years ago.
Ordering of Layers for EasyEDA team
posted by MikeDB , 4 years ago.
Ordering of inner layers on 4 layer board
posted by MikeDB , 4 years ago.
replied by JLCPCBsupport , 4 years ago.
Chinese New Year
posted by MikeDB , 4 years ago.
replied by JLCPCBsupport , 4 years ago.
Parts on Extended list seem to never be in stock
posted by MikeDB , 4 years ago.
replied by Danielo Rodríguez , 2 years ago.
Component rotated on SMD build preview
posted by MikeDB , 4 years ago.
replied by andyfierman , 4 years ago.
Locked items moved !
posted by MikeDB , 4 years ago.
deleted
posted by MikeDB , 4 years ago.
replied by andyfierman , 4 years ago.
Any chance of adding inner layers to the 2D viewer ?
posted by MikeDB , 4 years ago.
Board reference numbers
posted by MikeDB , 5 years ago.
replied by JLCPCBsupport , 5 years ago.
Can't move the text on a Net Port
posted by MikeDB , 5 years ago.
replied by andyfierman , 5 years ago.
"Update PCB" sometimes not working
posted by MikeDB , 5 years ago.
replied by UserSupport , 5 years ago.
Changing routing of a PCB net to tidy it up
posted by MikeDB , 5 years ago.
replied by UserSupport , 5 years ago.
Undo not working correctly
posted by MikeDB , 5 years ago.
replied by John Lonergan , 4 years ago.
Solder Resist colours for those interested
posted by MikeDB , 6 years ago.
Can you please sort out this mm mils issue once and for all !
posted by MikeDB , 6 years ago.
replied by andyfierman , 4 years ago.
DRC misses track going across a board cutout region
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Breakoffs - spaced joints or V-cuts
posted by MikeDB , 6 years ago.
replied by pcb_Service , 5 years ago.
Spoke and Direct Pad connections on ground planes
posted by MikeDB , 6 years ago.
replied by andyfierman , 5 years ago.
Updating a PCB occasionally says there are zero components in the Design Manager
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Can't grab a board cutout with related holes any more
posted by MikeDB , 6 years ago.
Don't they think ?
posted by MikeDB , 6 years ago.
replied by pcb_Service , 6 years ago.
Printing is terrible
posted by MikeDB , 6 years ago.
Problem with Custom Fonts upload
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
plated hole to PCB edge minimum distance
posted by MikeDB , 6 years ago.
replied by pcb_Service , 6 years ago.
Schematic Text Tool not working in Desktop version
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Blank screen when clicking on the Messages Bell in Desktop viewer
posted by MikeDB , 6 years ago.
New version - Updating PCB fails randomly
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
JLCPCB solder resist
posted by MikeDB , 6 years ago.
Messaging window doesn't take account of users with magnified text
posted by MikeDB , 6 years ago.
Solder mask colours
posted by MikeDB , 6 years ago.
Solder mask colours
posted by MikeDB , 6 years ago.
Add a user-customisable sign off checklist after final DRC but before sending board to JLCPCB
posted by MikeDB , 6 years ago.
replied by andyfierman , 6 years ago.
Add feature to Right Click on any device in EELib and it opens the LCSC page so that we can see the device
posted by MikeDB , 6 years ago.
Placing PCB modules on a single PCB doesn't take the ground plane with it
posted by MikeDB , 6 years ago.
Anybody need access to a reflow oven in Manchester UK area ?
posted by MikeDB , 6 years ago.
Modified spoked ground planing
posted by MikeDB , 6 years ago.
replied by andyfierman , 6 years ago.
Layers Floating window sometimes loses key layers
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Snap to Millimeters often fails
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Auto Router ?
posted by MikeDB , 6 years ago.
Changing package type on 400 diodes :-)
posted by MikeDB , 6 years ago.
replied by andyfierman , 6 years ago.
How do I import .EPW files from RS ?
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Saving Photo View as a JPG
posted by MikeDB , 6 years ago.
replied by andyfierman , 4 years ago.
A much better release
posted by MikeDB , 6 years ago.
New release fail
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Display end to end net resistance
posted by MikeDB , 6 years ago.
Any suggestions on Chinese assembly houses ?
posted by MikeDB , 6 years ago.
Handle different sizes of via better.
posted by MikeDB , 6 years ago.
replied by andyfierman , 6 years ago.
On Photo View, place the top and bottom images side by side.
posted by MikeDB , 6 years ago.
Don't flag me that I've just posted a response !
posted by MikeDB , 6 years ago.
replied by andyfierman , 6 years ago.
drill sizes
posted by MikeDB , 6 years ago.
Different size pads on top and bottom of DIP ICs (and some other devices)
posted by MikeDB , 6 years ago.
\n seems to have stopped working
posted by MikeDB , 6 years ago.
replied by andyfierman , 6 years ago.
Has anybody managed to get a complete BOM from LCSC ?
posted by MikeDB , 6 years ago.
Solder mask clearance - ignore this one
posted by MikeDB , 6 years ago.
Solder mask clearance
posted by MikeDB , 6 years ago.
Solder mask clearance
posted by MikeDB , 6 years ago.
Two different PCB layouts from one schematic
posted by MikeDB , 6 years ago.
replied by haidy_easyeda , 10 months ago.
Combined DIP-8 and SOIC-8 pad layout
posted by MikeDB , 6 years ago.
replied by UserSupport , 6 years ago.
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
