Multiple net labels on a net no longer show a warning message in lower left of Schematic Design Manager
posted by andyfierman , 2 years ago.
replied by UserSupport , 2 years ago.
BUG REPORT: MESSAGES > ALL does not show UNREAD messages!
posted by andyfierman , 2 years ago.
replied by UserSupport , 2 years ago.
Reply to PM just returns "null!"
posted by andyfierman , 2 years ago.
replied by UserSupport , 2 years ago.
Description text opens then closes immediately on BSS138 Spice Symbol
posted by andyfierman , 3 years ago.
Example Quick Start to EasyEDA: Convert Schematic To PCB... fails.
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Top layer pad overrides bottom layer track
posted by andyfierman , 3 years ago.
[Fixed] Messaging on Android broken
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Messages count says 99+ and shows deleted messages in list but All messages on PC is empty!
posted by andyfierman , 3 years ago.
replied by daxliniere , 2 years ago.
[Fixed] Post failed Network failed test post
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Hyperlinks in table of Extensions no longer work.
posted by andyfierman , 3 years ago.
Bugs in Instruments and Meters
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
False warning of "Post Failed. Network Failed!"
posted by andyfierman , 3 years ago.
Forum Search results point to wrong page with 404 error
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
Search for Username should also list user's Topics and Comments
posted by andyfierman , 3 years ago.
Navigator button on Android
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Replies to posts not being notified to user
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
Please wrap the Messages window properly and always show the delete button.
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
No longer possible to see when users joined EasyEDA
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
No longer possible to see user posts from their home pages.
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
[Fixed] Last week it was over 10.5 million designs...
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
There is no general Bug Reports Category
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
[Fixed] Latest Replies Category lists topics in reverse time order
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Login on EasyEDA Std, EasyEDA Pro, LCSC, JLCPCB, OSHWlab is very confusing.
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
User account/login menu is cropped
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
Autorouter set to route SMD components onto other layers must have SMD components layer enabled for routing.
posted by andyfierman , 3 years ago.
Pins unexpectedly disconnecting in Schematic
posted by andyfierman , 3 years ago.
Not Connected Flag behaviour is confusing and seems to disagree with Tutorial description
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Power pins on opa2277PA.2 symbol for C47994, are wrong.
posted by andyfierman , 3 years ago.
replied by difesa98 , 3 years ago.
Send to back does not work in PCB.
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
Please add Keep Islands = Yes/No attribute for inner plane layers
posted by andyfierman , 3 years ago.
Show Clearance attribute in Copper Area Manager for info only.
posted by andyfierman , 3 years ago.
Copper Area Manager is broken
posted by andyfierman , 3 years ago.
Via connectivity is seriously broken in 4 (and maybe more than 4) layer boards with planes.
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
Cannot clone OSHWLab project: Parameter error.
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
PCB with V-Cut displayed incorrectly in 2D and Fabrication Option views
posted by andyfierman , 3 years ago.
Show part Library by clicking on any symbol in a Schematic or a footprint in a PCB.
posted by andyfierman , 3 years ago.
When did JLCPCB introduce the 3D printing service?
posted by andyfierman , 3 years ago.
replied by JLCPCBsupport , 3 years ago.
Arc 45degrees routing option broken compared to Line 45degrees
posted by andyfierman , 3 years ago.
Why does number of parts found change with library selection?
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
Why are JLCPCB Parts @JLCPCB not listed in JLCPCB Assembled @EasyEDA?
posted by andyfierman , 3 years ago.
replied by andyfierman , 3 years ago.
Cannot stay logged in since 211128 server update
posted by andyfierman , 3 years ago.
replied by UserSupport , 3 years ago.
My Comments now only shows My Comments on my Projects, not as replies to topics the Forum.
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
oshwlab.com is down: 504 Gateway Time-out
posted by andyfierman , 4 years ago.
[FIXED] Image drag and drop or paste no longer works in Chrome/ Chromium on Linux
posted by andyfierman , 4 years ago.
How to add a spice model to a spice symbol which does not already have one
posted by andyfierman , 4 years ago.
Schematic "Save As..." shows option to save to current project and says "Saved successfully!" but does not save
posted by andyfierman , 4 years ago.
replied by UserSupport , 4 years ago.
Please improve Cut Silkscreen feature in Footprint Editor
posted by andyfierman , 4 years ago.
replied by UserSupport , 4 years ago.
PCB Group/Ungroup tool only groups tracks and not Footprints.
posted by andyfierman , 4 years ago.
[Fixed] No longer possible to delete own Topics, can only now delete own comments
posted by andyfierman , 4 years ago.
replied by andyfierman , 3 years ago.
Add Reply button to original post of new topics
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
V-Cut lines must be drawn on the Board Outline Layer.
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
Annotate symbol to show that the footprint requires placement of more than one physical component.
posted by andyfierman , 4 years ago.
replied by marceljoseph , 2 years ago.
"Less Than" character being wrongly parsed in Edit > Spice Model
posted by andyfierman , 4 years ago.
Please make closing projects close associated editor sheets
posted by andyfierman , 4 years ago.
CTRL+Enter for new line in placed text fields sometimes ignored.
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
Useful learning resources
posted by andyfierman , 4 years ago.
Reset Component ID fails on Schematics with subparts
posted by andyfierman , 4 years ago.
replied by UserSupport , 4 years ago.
How to represent off-board and not-fitted components.
posted by andyfierman , 4 years ago.
How to wire directly to the PCB
posted by andyfierman , 4 years ago.
Which R0805 for PCBA?
posted by andyfierman , 4 years ago.
replied by JLCPCBsupport , 4 years ago.
Allow Prefixes in PCB to be unlocked separately from the Footprint
posted by andyfierman , 4 years ago.
replied by UserSupport , 4 years ago.
Unable to Report Error on bad Footprint
posted by andyfierman , 4 years ago.
replied by UserSupport , 4 years ago.
0805 resistors in same series from LCSC have different footprints!
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
No WaveForm plot for simple dual output Signal Generator sim
posted by andyfierman , 4 years ago.
Please fix selecting more than one word in posts longer than visible screen height
posted by andyfierman , 4 years ago.
Please preserve incomplete posts.
posted by andyfierman , 4 years ago.
Cut and paste spice symbol sub-parts breaks prefix editing after pasting
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
Mouse hover over oval pads in footprint do not show net name
posted by andyfierman , 4 years ago.
Please reinstate the DETACH function
posted by andyfierman , 4 years ago.
replied by Uptown Kitten453 , 4 years ago.
Please reintroduce import of LTspice .asc schematic and .asy symbol files
posted by andyfierman , 4 years ago.
replied by andyfierman , 2 years ago.
Warning message when cloning oshwlab project: what does it mean?
posted by andyfierman , 4 years ago.
Some useful free learning resources
posted by andyfierman , 4 years ago.
Sub-part renumbering in cloned schematics is dangerous before and broken after reannotation.
posted by andyfierman , 4 years ago.
Android smartphone: touch in empty space inside sheet selects sheet border
posted by andyfierman , 4 years ago.
Desktop Client now available at V6.4.17, Linux 64bit, Mac Darwin 64 bit and Windows 32 and 64 bit.
posted by andyfierman , 4 years ago.
Problems with VCC vs +5V netflags in simulations.
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
How to set your own theme for colours etc. in the Schematic Editor
posted by andyfierman , 4 years ago.
[SOLVED] No Solid areas not removing copper in Footprint
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
More problems with the Library
posted by andyfierman , 4 years ago.
Net-tie: a copper only component with 2 pads to split nets without DRC errors and multiple netname warnings.
posted by andyfierman , 4 years ago.
replied by andyfierman , 1 year ago.
New messages not moved to top of list in User Center > Messages then hidden until More or Unread buttons clicked
posted by andyfierman , 4 years ago.
Misaligned drill holes: problem with EasyEDA or gerbv 2.7.0?
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
Problem with LTspice in EasyEDA opening encrypted LTspice subckts?
posted by andyfierman , 4 years ago.
How to remove the exposed copper (close the solder mask aperture) in a through hole pad
posted by andyfierman , 4 years ago.
replied by andyfierman , 4 years ago.
Please correct typo
posted by andyfierman , 4 years ago.
replied by UserSupport , 4 years ago.
Not possible to report error in User Contributed part
posted by andyfierman , 4 years ago.
How to make a Project public and share the links to it.
posted by andyfierman , 5 years ago.
Library information for JLCPCB Assembled is wrong
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
How to delete a post
posted by andyfierman , 5 years ago.
replied by andyfierman , 3 years ago.
How to install the Desktop Client in Linux
posted by andyfierman , 5 years ago.
replied by UserSupport , 3 years ago.
Pin numbers but not pin names can be corrected in the Footprint Manager
posted by andyfierman , 5 years ago.
Please add Description to all parts in the Libraries
posted by andyfierman , 5 years ago.
Tutorials missing from Help
posted by andyfierman , 5 years ago.
replied by andyfierman , 4 years ago.
Search Libraries tool does not find parts
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
[SOLVED: my mistake!] Update PCB... or Import Changes... when used with Modules appears to be broken.
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Please make adding vias and changing layers consistent for 2 and for multilayer PCBs with inner plane layers.
posted by andyfierman , 5 years ago.
How to copy projects created and saved in Desktop Client Projects Offline mode to the cloud.
posted by andyfierman , 5 years ago.
Make VCC and +5V netflags work with any DC voltage value in simulations
posted by andyfierman , 5 years ago.
Please fix the Lossless Transmission Line Tline symbol and parameter passing to the model.
posted by andyfierman , 5 years ago.
Autorouter not functional / stuck at zero or low percent: workaround for local autorouter only.
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Russian translation error.
posted by andyfierman , 5 years ago.
replied by radiofannat , 5 years ago.
Getting Started with EMC and EM Engineering - Some useful resources - (Author Keith Armstrong)
posted by andyfierman , 5 years ago.
Why no User Contributed tab in Search libraries until search term entered?
posted by andyfierman , 5 years ago.
Wrong and duplicate headings in Symbol Library section of Tutorial
posted by andyfierman , 5 years ago.
Update to V6.4.3 replaces CTRL+R with F8 Hotkey to run simulation!
posted by andyfierman , 5 years ago.
Slot crossing V-Cut line: is it OK?
posted by andyfierman , 5 years ago.
replied by JLCPCBsupport , 5 years ago.
Click on "You have joined the project [link to Project name]" notification should open project for me
posted by andyfierman , 5 years ago.
How to use the EasyEDA Oscilloscope
posted by andyfierman , 5 years ago.
replied by andyfierman , 1 year ago.
Please update the Update Record: no record of updates for V6.4
posted by andyfierman , 5 years ago.
UPDATED: Power supply decoupling and why it matters.
posted by andyfierman , 5 years ago.
Not Connected feature for unconnected pads in Footprints with multiple same-numbered pads on PCB
posted by andyfierman , 5 years ago.
replied by tokyodave , 1 year ago.
Component autoplacement into PCB!
posted by andyfierman , 5 years ago.
replied by andyfierman , 4 years ago.
Highlight symbols with no PCB Footprints assigned in the Design Manager Components View list.
posted by andyfierman , 5 years ago.
Use the Design Manager to check for, find and fix errors 2.
posted by andyfierman , 5 years ago.
Use the Design Manager to check for, find and fix errors 1.
posted by andyfierman , 5 years ago.
Unintended join when junction of two wires on same net crossed by third on different net
posted by andyfierman , 5 years ago.
replied by GerritMax , 5 years ago.
Trying to order PCB. Click on "Choose the country of arrival first": page greys out and stops
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Cutouts must be in the Board Outline Layer only? What about Solid Region set to Board Cutout?
posted by andyfierman , 5 years ago.
replied by andyfierman , 4 years ago.
With 45deg routing, moving PCB track segment joined to a non-45deg segment deletes vertex at join
posted by andyfierman , 5 years ago.
Double click to add vertex only works once on new track.
posted by andyfierman , 5 years ago.
+ and - keys to change PCB routing width on the fly broken?
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
Projects information and buttons do not fit frames at 0 browser zoom
posted by andyfierman , 5 years ago.
Messages do not fit frames at 0 browser zoom
posted by andyfierman , 5 years ago.
Distribute Array tool needs option to respect prefix order of selected components
posted by andyfierman , 5 years ago.
Select groups of components to re-annotate
posted by andyfierman , 5 years ago.
replied by rpt007 , 5 years ago.
Select which components to Re-annotate based on Prefix
posted by andyfierman , 5 years ago.
Please improve Searches in EasyEDA
posted by andyfierman , 5 years ago.
replied by billbrach , 4 years ago.
Please fix "Post failed. Check network connection" error message when posting in Cyrillic text.
posted by andyfierman , 5 years ago.
replied by andyfierman , 4 years ago.
Problems with subckt calls and simulation netlisting
posted by andyfierman , 5 years ago.
replied by andyfierman , 4 years ago.
Tapped transformer secondary phases are wrong: please correct spice pin numbering of US symbols only.
posted by andyfierman , 5 years ago.
replied by jlcooper , 5 years ago.
Simulated potentiometer errors at 0% and 100% rotation
posted by andyfierman , 5 years ago.
How to accurately position PCB Footprints, Holes and other PCB objects
posted by andyfierman , 5 years ago.
replied by rubenchevez1995 , 5 years ago.
Voltage_Source_V_Behavioral_Source and Current_Source_I_Behavioral_Source in EELib are not a B sources
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
AC Analysis broken because "AC 1 0" is incorrectly appended to ALL Voltage sources
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Using Solid Region set to No Solid creates multiple DRC error when used in a PCB Footprint
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Since V6.3.39, Arc tools are almost useless
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
Solid Region set to No Solid does not cut away copper in pads in a PCB Lib
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
Add option to delete all Messages or all Notifications, not just one at a time.
posted by andyfierman , 5 years ago.
Search cannot find my Project!
posted by andyfierman , 5 years ago.
Give new Add Parameter attribute information a "Visible in Schematic: Yes/No" option.
posted by andyfierman , 5 years ago.
Please make JLCPCB components catalogue sortable and searchable like LCSC parts lists
posted by andyfierman , 5 years ago.
replied by milordy , 5 years ago.
Use Space then Ctrl+Enter to insert a new line in a text field
posted by andyfierman , 5 years ago.
Auto-Router stop working after adding text on TopSilkLayer
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
EasyEDA BoM parsing error also breaks the JLCPCB SMT assembly BoM processing.
posted by andyfierman , 5 years ago.
replied by sennert , 5 years ago.
Export EasyEDA PCB designs into a 2D or 3D CAD package.
posted by andyfierman , 5 years ago.
replied by UserSupport , 3 years ago.
Hiding pins disconnects them (2 of 2)
posted by andyfierman , 5 years ago.
Hiding pins disconnects them (1 of 2)
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
SIM mode incorrectly reports missing models when they are already in the library
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Update needed: https://docs.easyeda.com/en/Export/Export-PCB/index.html#Print-PCB-and-Etching
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Spice model search results are still incomplete (4)
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
Spice model search results are still incomplete (3)
posted by andyfierman , 5 years ago.
Spice model search results are still incomplete (2)
posted by andyfierman , 5 years ago.
Spice model search results are still incomplete (1)
posted by andyfierman , 5 years ago.
Pad to copper area DRC clearance error where there should not be
posted by andyfierman , 5 years ago.
Image upload appears to reject upper case file suffices
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
Add Pad Number attribute to Vias
posted by andyfierman , 5 years ago.
replied by tobalt , 5 years ago.
Call for AD8422 subckt in ADI1.lib is broken
posted by andyfierman , 5 years ago.
[Solved] Create copper area inside another: inner first is OK but outer first fails with no warnings
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Unfilled corners at vertices of copper fill
posted by andyfierman , 5 years ago.
replied by UserSupport , 5 years ago.
Simulation is broken in V6.3.22
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Please lengthen slider pin on EELib pot symbol by 0.5 grid square
posted by andyfierman , 5 years ago.
replied by andyfierman , 5 years ago.
Offset and amplitude in Sim mode Signal Generator is implemented incorrectly.
posted by andyfierman , 5 years ago.
PCB library Error Report character count is wrong: says 256 limit but rejects much shorter strings.
posted by andyfierman , 6 years ago.
Y origin of symbols is broken
posted by andyfierman , 6 years ago.
Snap to pin is inconsistent
posted by andyfierman , 6 years ago.
replied by UserSupport , 5 years ago.
Make the icons for System simulatable Spice Symbols red to help distinguish them from non-simulatable Schematic Symbols
posted by andyfierman , 6 years ago.
In Share my work box: please change confusing "Cancel" button name to "Close"
posted by andyfierman , 6 years ago.
Footprint manager Batch Update not working
posted by andyfierman , 6 years ago.
replied by UserSupport , 4 years ago.
Cannot scroll down to view Footprint Manager pad dimensions info on smaller screens
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Option to update track names in PCB on Update PCB/Import Changes
posted by andyfierman , 6 years ago.
replied by UserSupport , 5 years ago.
In Sim mode: cannot select and place Supply Flags from EELib
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Part selection errors in Footprint Manager when using SHIFT+left-click block selection
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Inconsistent connection to pad on single-numbered multi-padded footprint
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Error in Update PCB with subparts across more than one schematic sheet.
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
Repeated R then Y-with-vertical-text causes netlabel text to wander away from netlabel anchor point.
posted by andyfierman , 6 years ago.
replied by UserSupport , 3 years ago.
How to create a capacitive touch pad
posted by andyfierman , 6 years ago.
replied by MikeDB , 6 years ago.
How to create a solid or filled circle using the Circle tool
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Symbols and Footprints do not show when viewing in Resources
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
[Solved] Cannot scroll long Messages properly on Android
posted by andyfierman , 6 years ago.
replied by andyfierman , 5 years ago.
Understanding Ratlines.
posted by andyfierman , 6 years ago.
How to avoid DRC errors when connecting to PCB Footprints (a.k.a. PCB Libs)
posted by andyfierman , 6 years ago.
replied by andyfierman , 4 years ago.
Document layer does not swap from top to bottom layer with the rest of the footprint.
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
Cannot "Modify" Description of own spice symbol symbol.
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Set origin to centre grid of symbol fails at 100% zoom: zoom needs to be > 100%
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Translation error
posted by andyfierman , 6 years ago.
Questions about the dimensions of two adjacent multilayer (PTH) pads
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
The 20H and Ground Plane Extension rules: benefits and limitations of applying them
posted by andyfierman , 6 years ago.
replied by MikeDB , 6 years ago.
Opening project gets stuck rebuilding the copper areas of the PCB
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
Updating multiple instances of the same symbol takes forever.
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Inconsistent setting of Paste Mask Expansion attribute after entering negative value.
posted by andyfierman , 6 years ago.
Import and reverse engineer Gerbers into EasyEDA PCB.
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
Parts do not appear listed in Personal Library after clicking Favorite
posted by andyfierman , 6 years ago.
replied by Ryan Santos , 4 years ago.
[Must read] How to ask for help and get an answer.
posted by andyfierman , 6 years ago.
replied by andyfierman , 2 years ago.
Remember forum text if accidentally navigate away and back to page
posted by andyfierman , 6 years ago.
Automatic calculation of Board Outline on Convert to PCB... sometimes fails
posted by andyfierman , 6 years ago.
Allow users to add an image of a component
posted by andyfierman , 6 years ago.
replied by rom1nux , 6 years ago.
How to create findable footprints and searchable symbols
posted by andyfierman , 6 years ago.
replied by EasyEDA , 6 years ago.
No login/out on Docs pages
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
Cannot add "Manufacturer" entry when cloning part with no "Manufacturer" entry in Search Libraries
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
Tracks drag with the pads when you move a component but not when you rotate it?
posted by andyfierman , 6 years ago.
replied by UserSupport , 6 years ago.
"Add Solder Mask" is confusing. Please rename.
posted by andyfierman , 6 years ago.
replied by andyfierman , 6 years ago.
Short circuit caused by text in copper layer not detected by DRC.
posted by andyfierman , 6 years ago.
Option to display selected Custom Attributes next to symbol in schematic
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
How to create a four wire sensing or Kelvin Connection on a PCB
posted by andyfierman , 7 years ago.
Notifications icon always shows 9 even after login and reading them.
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
Change "Import Changes" button in PCB Editor to "Update PCB"
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
TAB Hotkey breaks canvas if right hand Attributes panel closed
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
How to place multiple vias in a PCB footprint
posted by andyfierman , 7 years ago.
replied by UserSupport , 4 years ago.
Document layer not shown in PCB Editor floating Layers pallete
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
Add track length measurement between any two nodes on multi-node contiguous and branched tracks.
posted by andyfierman , 7 years ago.
replied by rom1nux , 6 years ago.
About User Contributed Schematic Symbols and PCB Packages
posted by andyfierman , 7 years ago.
replied by UserSupport , 4 years ago.
Add an "Edit Points" dialogue box option to Board Outlines.
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
Rectangular pads highlight white, oval pads highlight grey.
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
Cannot ADD points to Copper Area and Solid Region by clicking on outline.
posted by andyfierman , 7 years ago.
replied by andyfierman , 6 years ago.
Pads with holes in them not shown clearly on all PCB layers.
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
Inconsistent handling of illegal characters.
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
JLCPCB Gerber Viewer not accepting EasyEDA Gerber zips
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
No Search box in Smartphone/mobile view of Forum and other non-editor pages
posted by andyfierman , 7 years ago.
replied by UserSupport , 4 years ago.
2SC3356 NPN transistor in PNP section of panel in EELib
posted by andyfierman , 7 years ago.
replied by UserSupport , 7 years ago.
Option to print/export an enhanced assembly/debug aid drawing.
posted by andyfierman , 7 years ago.
Help button for "Different Designs" on PCB Order page points to wrong page with no useful information.
posted by andyfierman , 7 years ago.
Multiple board outline with copper area bug
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
Text entered into forum post and New Topic is lost when navigating away from and back to that page
posted by andyfierman , 7 years ago.
New Topic should inherit Category from Forum from which it is invoked.
posted by andyfierman , 7 years ago.
Chat message view truncates text at left or right hand edges
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
Attributes for voltage and current sources are broken.
posted by andyfierman , 7 years ago.
replied by Tutorials , 7 years ago.
Components being deleted on saving schematic.
posted by andyfierman , 7 years ago.
replied by andyfierman , 7 years ago.
No WaveForm results from transient simulations.
posted by andyfierman , 7 years ago.
replied by Tutorials , 7 years ago.
How to use Modules
posted by andyfierman , 7 years ago.
replied by tobalt , 4 years ago.
Allow merged exported layers to be mirrored
posted by andyfierman , 7 years ago.
replied by Tutorials , 7 years ago.
Please add zener diode symbol back into EELib > Diodes panel
posted by andyfierman , 7 years ago.
replied by Tutorials , 7 years ago.
New Project Public/Private setting persists from previous New Project
posted by andyfierman , 7 years ago.
replied by Tutorials , 7 years ago.
Photo View renders all of Solder Mask aperture as copper
posted by andyfierman , 8 years ago.
replied by dillon , 8 years ago.
Export schematic netlist for PCB is broken
posted by andyfierman , 8 years ago.
replied by Tutorials , 8 years ago.
Parameters added to packages in PCB (created without schematic) do not all appear in BoM.
posted by andyfierman , 8 years ago.
replied by andyfierman , 5 years ago.
`Super Menu > Miscellaneous > Annotate` is broken
posted by andyfierman , 8 years ago.
replied by Tutorials , 8 years ago.
Connect Pad to Pad tool is broken in V4.10.3
posted by andyfierman , 8 years ago.
replied by Tutorials , 8 years ago.
Repost `What's new in Version X.X.X` notes from earlier versions.
posted by andyfierman , 8 years ago.
replied by andyfierman , 8 years ago.
Login takes user back to the page they were on before logging in and not home page
posted by andyfierman , 8 years ago.
replied by Tutorials , 8 years ago.
Assign attributes to an image imported into a copper layer
posted by andyfierman , 8 years ago.
replied by andyfierman , 5 years ago.
Pin count mismatch and ambiguous description with LCSC parts C18270 (and C31636)
posted by andyfierman , 8 years ago.
replied by dillon , 8 years ago.
Tags should not be case sensitive
posted by andyfierman , 8 years ago.
replied by Tutorials , 8 years ago.
How to use the MOUNTED attribute of Schematic Symbols.
posted by andyfierman , 8 years ago.
replied by andyfierman , 5 years ago.
Essential checks before clicking the Convert Project to PCB…, Update PCB… or Import Changes… buttons.
posted by andyfierman , 8 years ago.
`How to use team function` link is broken
posted by andyfierman , 8 years ago.
Add Open EasyEDA Project option
posted by andyfierman , 8 years ago.
replied by andyfierman , 8 years ago.
How to renumber (re-annotate) components in a schematic
posted by andyfierman , 8 years ago.
How to resolve "Prefix Conflict" error.
posted by andyfierman , 8 years ago.
How to change canvas, wire and symbol colours.
posted by andyfierman , 8 years ago.
When working in a Team, saved new PCB footprint does not show in SHIFT+F search
posted by andyfierman , 8 years ago.
replied by support , 8 years ago.
Solder Mask and Solder Paste layers not showing in PCB Editor?
posted by andyfierman , 8 years ago.
replied by support , 8 years ago.
Cannot update PCB in shared project
posted by andyfierman , 8 years ago.
replied by andyfierman , 8 years ago.
How to run a simulation
posted by andyfierman , 8 years ago.
replied by andyfierman , 5 years ago.
Try to post when not logged in: old login screen appears but does nothing.
posted by andyfierman , 8 years ago.
Allow PDF attachments to projects please
posted by andyfierman , 8 years ago.
replied by andyfierman , 5 years ago.
What to do if access to EasyEDA is lost for some reason.
posted by andyfierman , 8 years ago.
How to negate a layer for hand PCB etching
posted by andyfierman , 8 years ago.
replied by kpsthakur , 7 years ago.
DRC does not detect component placed inside NPTH Solid Region
posted by andyfierman , 8 years ago.
DRC does not detect manual routing across NPTH Solid Region
posted by andyfierman , 8 years ago.
replied by andyfierman , 8 years ago.
ASCII import from Altium Designer 16.06 broken?
posted by andyfierman , 8 years ago.
Spice symbol with embedded subckt does not work
posted by andyfierman , 8 years ago.
Spice subckt sheet and symbol does not work
posted by andyfierman , 8 years ago.
New tags in Spice Components does not create new tag sections when logged in as user 'components'
posted by andyfierman , 8 years ago.
Description in Project creation dialogue does not appear in Project Content section.
posted by andyfierman , 8 years ago.
replied by scpvisualdivision , 8 years ago.
Cannot change file names (or description text) in Project components
posted by andyfierman , 8 years ago.
Copper areas with shared edges do not respect clearances
posted by andyfierman , 8 years ago.
replied by andyfierman , 7 years ago.
How to assign or change the PCB footprint assigned to a schematic symbol and then update them in the PCB
posted by andyfierman , 8 years ago.
Project view page for new project files is broken
posted by andyfierman , 8 years ago.
replied by andyfierman , 8 years ago.
Project view page for LTspice .asc file import is broken
posted by andyfierman , 8 years ago.
In SHIFT+F, make it possible to search for any component by Tag.
posted by andyfierman , 8 years ago.
replied by dillon , 8 years ago.
Problem with UNO_R3 PCB footprint.
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
How to Zoom, Pan and change the border of a Schematic
posted by andyfierman , 9 years ago.
replied by JohnnyCheung , 8 years ago.
Spice symbol + Spice subckt does not work.
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Please rename Top and Bottom Paster layers to Top and Bottom Paste layers
posted by andyfierman , 9 years ago.
replied by support , 9 years ago.
Please clarify names of Top and Bottom Solder Layer
posted by andyfierman , 9 years ago.
replied by LISA_DALTON , 7 years ago.
How to share a Project
posted by andyfierman , 9 years ago.
Select & delete on visible layer also selects & deletes on invisible layers
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Spurious tracks in 'DRV8825 stepper motor driver carrier' package causing DRC errors
posted by andyfierman , 9 years ago.
replied by EasyEDA , 9 years ago.
Add LED colour, beam width, brightness and forward voltage drop at rated forward current to EasyEDA parts
posted by andyfierman , 9 years ago.
Add dielectric type to EasyEDA ceramic caps in library
posted by andyfierman , 9 years ago.
Reversed pins on `RAD` series electrolytic cap footprints
posted by andyfierman , 9 years ago.
replied by EasyEDA , 7 years ago.
Top to bottom swap in successive PCB module placements
posted by andyfierman , 9 years ago.
replied by dillon , 9 years ago.
Add https://easyeda.com/Doc/Tutorial/new-v-3.10.htm to Tutorial pages
posted by andyfierman , 9 years ago.
Please fix error returned by https://easyeda.com/component/user/spicesymbol
posted by andyfierman , 9 years ago.
Please fix Previous/Next buttons on the bottom of these pages...
posted by andyfierman , 9 years ago.
Project management in EasyEDA V3.10.x onwards
posted by andyfierman , 9 years ago.
Submit or OK button in editing Descriptions under `≡` icon fixed in Chinese
posted by andyfierman , 9 years ago.
`≡` icon in https://easyeda.com/projects/mylists has no effect
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
No option to modify schematic (or PCB) Name or Description in Editor:
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Cannot modify Project via `View Project Page`
posted by andyfierman , 9 years ago.
Links to any public schematic or PCB file from before V3.10.4 no longer work.
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
First entry in User contributed ARDUINO NANO symbols has pinut error.
posted by andyfierman , 9 years ago.
All links in Simulation eBook no longer work
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
https://easyeda.com/search is still seriously broken
posted by andyfierman , 9 years ago.
replied by tobalt , 9 years ago.
Clicking on name (blue text) in https://easyeda.com/components/mylists does nothing
posted by andyfierman , 9 years ago.
`Edit` button in https://easyeda.com/components/mylists does nothing
posted by andyfierman , 9 years ago.
tags attached to symbols and footprints in my components all deleted in update.
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
New post does not show until pressing F5
posted by andyfierman , 9 years ago.
Beta 3.10.3: Please wrap `Description` text in SHIFT+F search
posted by andyfierman , 9 years ago.
replied by thorbadmin , 9 years ago.
Please fix the expressions in - or remove - the EasyEDA Sources.
posted by andyfierman , 9 years ago.
replied by andyfierman , 8 years ago.
Beta 3.10.2. General packages in Navigation panel empty: remove heading?
posted by andyfierman , 9 years ago.
How to find simulatable parts and run a simulation in EasyEDA
posted by andyfierman , 9 years ago.
replied by andyfierman , 7 years ago.
Net and Part naming conventions
posted by andyfierman , 9 years ago.
replied by Tutorials , 8 years ago.
How does the `Connect Pad to Pad` tool work?
posted by andyfierman , 9 years ago.
replied by jesus toural , 2 years ago.
The best way to design a PCB in EasyEDA
posted by andyfierman , 9 years ago.
How to add extra information to the Bill of Materials (BOM)
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Minor typo in payment dialogue
posted by andyfierman , 9 years ago.
Poor formatting in Search for components dialogue
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Import of LTspice .asy symbol files please.
posted by andyfierman , 9 years ago.
replied by andyfierman , 8 years ago.
Open schematic and PCB files with canvas origin placed at top left of canvas window.
posted by andyfierman , 9 years ago.
Can't add/edit spice models in https://easyeda.com/asdw/spice/lists
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Please improve the way SHIFT+F SEARCH works using partial component names.
posted by andyfierman , 9 years ago.
Auto-placed text entry cursor gone from SHIFT+F SEARCH box
posted by andyfierman , 9 years ago.
Flip flops in EasyEDA Libs Logic devices do not call the correct subckts
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Pads on All Layers with same netname do not show as error in Design Manager
posted by andyfierman , 9 years ago.
replied by dillon , 9 years ago.
如果EasyEDA编辑器崩溃了怎么办？ Things to try if EasyEDA behaves badly.
posted by andyfierman , 9 years ago.
Bad 2N3904 symbols
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
EasyEDA asking to update to earlier version!
posted by andyfierman , 9 years ago.
Selecting Sources in EasyEDA
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Make text entry same PCB editor as in Schematic editor
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Photo View does not shows holes unless there is a pad around it
posted by andyfierman , 9 years ago.
replied by dreAn , 8 years ago.
Multipart component numbering is broken.
posted by andyfierman , 9 years ago.
replied by support , 9 years ago.
User selectable keep or renumber netlabel numbering
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Waveforms are distorted after being saved then reopened
posted by andyfierman , 9 years ago.
Open Shift+F search with cursor already in the text box.
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Make all symbols under EasyEDA Libs searchable using Filter
posted by andyfierman , 9 years ago.
Manually placed top silk screen shown behind all copper. Photo and Gerbers OK.
posted by andyfierman , 9 years ago.
replied by dillon , 9 years ago.
Please add "Edit Pad Map Information" function for package like "edit pin map info" for symbol
posted by andyfierman , 9 years ago.
Problem with Waveform displaying DB() and PH() for signals of below -100dB
posted by andyfierman , 9 years ago.
replied by andyfierman , 9 years ago.
Improved readability of forums on protable devices please.
posted by andyfierman , 9 years ago.
replied by dillon , 9 years ago.
Cross reference Order number to PCB file or Project name or number
posted by andyfierman , 9 years ago.
Number of Public projects is different in page heading and tabs
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
How to create or edit a part and save it privately
posted by andyfierman , 10 years ago.
replied by andyfierman , 5 years ago.
Edit button in my-favorites page is delete not edit
posted by andyfierman , 10 years ago.
How to find out what spice models are available in EasyEDA.
posted by andyfierman , 10 years ago.
replied by andyfierman , 9 years ago.
Text entered in Project Description using Document > New > Project in Editor is lost when clicking Modify
posted by andyfierman , 10 years ago.
replied by Tutorials , 8 years ago.
Link to Tutorial broken in Editor Help Topics
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Gerber download is broken
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Schematic Annotation does not update prefixes in PCB so creates new ratlines
posted by andyfierman , 10 years ago.
replied by andyfierman , 1 year ago.
No join dot
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
Pin off grid problem
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Pasting copied schematic breaks connectivity
posted by andyfierman , 10 years ago.
replied by andyfierman , 5 years ago.
Cursor gets stuck in right-click-and-hold dragging the canvas.
posted by andyfierman , 10 years ago.
Toggle /resize right bar disappears after right panel is opened.
posted by andyfierman , 10 years ago.
Preview pictures in https://easyeda.com/username/projectname are poor and hard to read
posted by andyfierman , 10 years ago.
replied by example , 10 years ago.
'Coming Soon' and other 'My Account' display problems in Chrome and Firefox
posted by andyfierman , 10 years ago.
replied by example , 10 years ago.
How to delete Projects and Documents (files) within them.
posted by andyfierman , 10 years ago.
Autorouter now available in EasyEDA.
posted by andyfierman , 10 years ago.
replied by mesopcb , 10 years ago.
Cannot abort failed image/file upload.
posted by andyfierman , 10 years ago.
Can't upload 4.1MB images into Project description or into forum post.
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Problem parsing a pasted-in edited TL081EE subckt?
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Login/out broken in Chrome
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Sharing not working: permissions problem?
posted by andyfierman , 10 years ago.
replied by example , 10 years ago.
Options in Search results left hand list broken with different search terms
posted by andyfierman , 10 years ago.
Wrong information returned for same part when searching using different terms.
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Make "In BOM" so that user can toggle BOM visibility
posted by andyfierman , 10 years ago.
Add "In BOM" tick box to "Add new parameter" in new Schematic Lib and SPICE Symbol parts creation editors.
posted by andyfierman , 10 years ago.
Changing "Category" in Post New Topic does not change Content template
posted by andyfierman , 10 years ago.
Example's TL084N symbol created for Tesseract shows wrong save-to destination
posted by andyfierman , 10 years ago.
replied by example , 10 years ago.
Spice model library search
posted by andyfierman , 10 years ago.
replied by andyfierman , 8 years ago.
Anyone know a better way to create a dual footprint?
posted by andyfierman , 10 years ago.
Simulate > Simulation Results > Download netlist returns `No simulation result`
posted by andyfierman , 10 years ago.
replied by andyfierman , 9 years ago.
The pages at `https://easyeda.com/cgi/_Cxphdq/` can not be found
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Make the PCB origin user definable
posted by andyfierman , 10 years ago.
replied by andyfierman , 9 years ago.
Mark the 0,0 origin on the grid of the PCB canvas.
posted by andyfierman , 10 years ago.
Shift+F search is broken if search term has period in it.
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
Can't modify part descriptions from EE editor and different method between projects and files
posted by andyfierman , 10 years ago.
replied by example , 10 years ago.
Please redirect the old site at http://easyeda.com/editor to https://easyeda.com/editor
posted by andyfierman , 10 years ago.
replied by example , 10 years ago.
Typo in first time visit tutorial
posted by andyfierman , 10 years ago.
Please add the symbol for ELECTRET_MIC_EE to the EasyEDA Libs with user adjustable `lf`, `hf` and `Sens_dBV` values in the Properties panel.
posted by andyfierman , 10 years ago.
Please add the symbol for LDREE to the EasyEDA Libs with user adjustable `Rmin`, `Rmax` and `tc` values in the Properties panel.
posted by andyfierman , 10 years ago.
How to scroll down the list of spice models in http://easyeda.com/cgi/_Cxphdq/?
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
PCB and Spice pin ordering of new spice symbol resets to default sequence (1, 2, 3, 4 etc.)
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
posted by andyfierman , 10 years ago.
Something wrong with Markdown to show links in Firefox?
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Cannot set PCB pad size = hole size (V1.9.1 & V1.11.1)
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
Support file input for .inc, .lib and things like XSPICE State Machine
posted by andyfierman , 10 years ago.
replied by andyfierman , 10 years ago.
Missing part of image in EE intro tip (in Sandbox)
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
Look out for `µ` in place of `u` in imported LTspice .asc and netlist files.
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
Please allow Markdown in Comments under user examples
posted by andyfierman , 10 years ago.
replied by dillon , 10 years ago.
Part number not updated in user edited EasyEDA Libs symbols
posted by andyfierman , 10 years ago.
XY plot capability
posted by andyfierman , 10 years ago.
The EasyEDA spice Simulation eBook is now online!
posted by andyfierman , 10 years ago.
Suffix error when running AC Analysis from Green Man: no error using CTRL+R + spice directive
posted by andyfierman , 11 years ago.
Error: unknown subckt: but why?
posted by andyfierman , 11 years ago.
Out of frame text hard to find, select and delete
posted by andyfierman , 11 years ago.
replied by example , 11 years ago.
To simulate a schematic, every node MUST have a DC path to ground
posted by andyfierman , 11 years ago.
To simulate a schematic, it MUST have a ground.
posted by andyfierman , 11 years ago.
How to get help? Just click on "How to use EasyEDA" above!
posted by andyfierman , 11 years ago.
Can't draw circle, rectangle on board outline layer
posted by andyfierman , 11 years ago.
replied by Tutorials , 7 years ago.
Only offered 2 layer fab for 4 layer PCB in Order... dialogue..
posted by andyfierman , 11 years ago.
replied by dillon , 11 years ago.
How to save Private schematic symbols and PCB parts?
posted by andyfierman , 11 years ago.
replied by example , 10 years ago.
Subckt not picked up from spice symbol in User Libs
posted by andyfierman , 11 years ago.
replied by andyfierman , 11 years ago.
Text editing box to open in front of floating toolbars
posted by andyfierman , 11 years ago.
replied by example , 11 years ago.
Please open canvasses with the right hand properties panel visible (i.e. not hidden.).
posted by andyfierman , 11 years ago.
replied by example , 11 years ago.
Right hand properties panel auto hides after running any simulation that opens a WaveForm window.
posted by andyfierman , 11 years ago.
replied by example , 11 years ago.
Wrong WaveForm X axis units in DC Sweep
posted by andyfierman , 11 years ago.
replied by example , 11 years ago.
Probe current in tran but not in DC Sweep
posted by andyfierman , 11 years ago.
Filenames not updated in Anonymous mode
posted by andyfierman , 11 years ago.
replied by dillon , 11 years ago.
Which schematic parts have spice models?
posted by andyfierman , 11 years ago.
replied by dillon , 11 years ago.
Copy of arc placed off grid in schematic symbol with snap to grid enabled.
posted by andyfierman , 11 years ago.
X, Y cursor out of sync with X, Y axes
posted by andyfierman , 11 years ago.
Cannot layer swap multiple text selection
posted by andyfierman , 12 years ago.
Is there a way to improve or automate finding and fixing duplicate schematic ref des?
posted by andyfierman , 12 years ago.
replied by dillon , 12 years ago.
PCB Preview does not show flood
posted by andyfierman , 12 years ago.
replied by dillon , 12 years ago.
Bottom fill outline shown above top layer
posted by andyfierman , 12 years ago.
replied by dillon , 12 years ago.
Can't do stepped sweep
posted by andyfierman , 12 years ago.
replied by andyfierman , 12 years ago.
Resize/hide bar in parts browser missing
posted by andyfierman , 12 years ago.
replied by dillon , 12 years ago.
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
